Question about 2006 Harley Davidson FLHR Road king

1 Answer

2004 FLHRI ROAD KING BRAKE LIGHT IS STUCK ON.

CAN TAKE OUT BRAKE LIGHT FUSE AND IT GOES OUT.

Posted by on

  • jerrylmurphy Jan 03, 2009

    information helped me solve my problem. thanks

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 379 Answers

Hello,
There is 2 switches on your bike (like most motorcycles) and one of them is stuck on, broken, or the linkage to it is damaged!

The Front switch is actually part of the master cylinder /lever, and the rear switch is actuated when the right side brake pedal is depressed.

You will need to take a multimeter and check them both for a short with no power on using an ohmmeter. Another way is to disconnect the plug going to the switches & check the brake lite to see if it goes off & if it does that particular switch is in trouble and may need to be replaced.

Posted on Dec 28, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Change rear brake pads on 06 flhri road king


Hi Anonymous, for more information about your question please visit the websites below. Good luck and have nice day.
How to Change Rear Brake Pads on Harley Street Glide

Jul 09, 2012 | 2000 Harley Davidson FLHR-FLHRI Road king

1 Answer

How to fiend short in brake light


You may have a pinched wire under the switch housing on the right side of the handlebars. This could explain why the fuse still blows with the under seat wires unplugged.

May 07, 2012 | 2004 Harley Davidson FLHR - FLHRI Road...

1 Answer

Brake light stays on how do i fix it


Hi, Check brake switch it maybe stuck. If not replace it with new one.

Nov 18, 2011 | 2000 Harley Davidson FLHR-FLHRI Road king

1 Answer

Riding into work on a carb'd 2000 HD FLHR RoadKing and the dash/speedo stopped working. Then noticed blinkers and brake lights inop. Headlights and running lights still working. Is there a fuse to...


Underneath the center dash or seat there is the control module for the lights / speedo ensure that it did not come unplugged. Same problem happened to me on my 2004 Big Dog Pitbull which uses a very similiar module as your road king.

Sep 23, 2011 | 2000 Harley Davidson FLHR-FLHRI Road king

1 Answer

My back brake lights stay on my 2005 road king classic.


That will be either the front or rear switch sticking, first try unpluging the front brake light switch, with this disconected if the light stays on the problem is with the rear switch, locate the switch this will be close to the brake pedal normal spring opperated which can stick, check it is closing fully, you may also disconnect the switch and check the light goes out reconnect the front switch and check correct opperation, this would thenpoint the fault towards the rear switch

Sep 09, 2011 | 2000 Harley Davidson FLHR-FLHRI Road king

1 Answer

1999 Road King Brake lights will not come on


Sounds like you have a bad rear brake light switch, both front and rear brake lights work through this pressure switch.

Find the rear master cylinder and the metal brake line that comes out of it and goes under the bike towards the rear wheel. Follow this metal line until you come to a tee in the line. There is a pressure switch screwed into the line at the tee. Make sure the wires are plugged onto this switch. If they are and you still don't have a brake light, you may need a new pressure switch. Simply screw the old one out and the new in. Do not depress the rear brake pedal with the switch out.

Good Luck
steve

Sep 07, 2010 | 2000 Harley Davidson FLHR-FLHRI Road king

1 Answer

Brake light stays on causing cruise control not to engage. 2005 road king clasic


hand break switch was broken (inside the wire housing) not allowing the hand break lever to deactive, therefore causing the brake system to stay on.

May 17, 2009 | 2000 Harley Davidson FLHR-FLHRI Road king

Not finding what you are looking for?
2006 Harley Davidson FLHR Road king Logo

215 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Gills Lango

Level 2 Expert

195 Answers

Mike

Level 3 Expert

4334 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...