Hi M, Please describe in more detail what problem you are experiencing. Vibration is not correct at any speed. The gears can be changed at more or less any speed, as long as the engine maximum RPM is not exceeded and at slow speeds the engine does not labour by selecting too high a gear. Regards John
SOURCE: seems transmission gear shift problem
Pull the distick and smell the oil. If it's discoloured (black or dark brown) you know the transmission friction plates are burnt and needs a rebuilt.
Cheers
SOURCE: Transmission problem in E230 Benz
What you need to check is the transmission release bearing because if there is a clearance on the release bearing you will encounter this problem and also check the transmission oil.
I’m happy to assist further over the phone at https://www.6ya.com/expert/ramy_d9e7ebea3891f482
SOURCE: 2003 CHRYSLER 300M SPECAIL REPLACED VALVE BODY AND
Needs to relearn shift stratagies. May need scan tool help If trans shop did work take it back. Don't forget to use the right fluid. Even trans shops don't care.
SOURCE: Chevy Corsica 1995 gearshifting speed problem
ur computer probably wont show anything ur tranny problem can be anything fron needing a filter changed to vacuum problem to torque converter check the fluid for level if low fill up- before filling look and smell fluid it should be reddish in color not brownish [fluid burnt]if it smells burnt- need trans service can be just a filter and flush ,bad sensor-actuator or rebuild
Testimonial: "Thank you for your answer. My friend though almost the same about some of what you wrote and I will check it out. Thanks! :)"
269 views
Usually answered in minutes!
×