Question about 2000 kawasaki KDX 125

1 Answer

Need torque wrench settings for cylinder head bolts

Have you got the torque wrench settings for the cylinder head bolts on a Kawasaki KDX125 125cc 1992?
Thanks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 254 Answers

Try here http://www.manualz.info/

hope this helps

Posted on Jan 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cylinder head torque spec 2009 GSXR 750


this has to be done with a torque gauge, you tighten the head bolts to a specific torque, then a bit more not sure of what then you use a gauge and turn the wrench quarter of a turn I think but this is just to let you know you need a torque gauge, not a wrench although you need one of them as well. JUST PHONE A DEALER MATE usually helpful.

Apr 17, 2015 | 2009 Suzuki GSXR750

1 Answer

What is the cylinder head bolt torque specification on a 1975 Kawasaki z1 900


Hi, The cylinder head bolts should be torqued to 29 ft-lbs

Oct 18, 2014 | kawasaki Motorcycles

2 Answers

I have a 1987 kx 125 just put topend gasket set in with piston and rings and coolent is getting in the case bottom end anyone know why plz help me


It sounds as if you have rebuilt the engine without torqueing the head bolts. Although, it could be that the cylinder base gasket has been torn during the rebuild. Try to re-tighten the head bolts to the correct settings first. Good luck.

May 23, 2012 | 2003 kawasaki KX 125

1 Answer

What is the torque setting on the head bolt for a harley davidson sportster


Cylinder Head Bolt Installation
Factory Method
For each cylinder head, start with head bolt numbered one. In increasing number sequence (1-2-3-4), tighten the head bolt in three stages.
1. Tighten each bolt to 7-9 foot pounds of torque.
2, Tighten each bolt to 12-14 foot pounds of torque.
3. Mark each head bolt and head with aligning marks. Tighten each bolt 1/4 turn (90 degrees).


Cylinder Head Bolt Installation
Torque Wrench Method

For each cylinder head, start with head bolt numbered one. In increasing number sequence (1-2-3-4), tighten the head bolt in four stages.

1. Tighten each bolt to 7-9 foot pounds of torque.

2. Tighten each bolt to 12-15 foot pounds of torque.

3, Tighten each bolt to 22-25 foot pounds of torque.

4, Tighten each bolt to 38-42 foot pounds of torque


headboltsequence.gif

Good luck, i hope this helps.

Aug 06, 2011 | Harley Davidson XL 1200 C Sportster Custom...

1 Answer

Cylinder head torque wrench settings for yamaha yz450f


Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
2003 Head Bolt Torque Specs YZ 400 426 450
Cylinder Head Installing
YAMAHA YZ450F Owner Service Manual
OEM parts for Yamaha
http://www.yamaha-motor.com/assets/service/manuals/2004/lit-11626-17-11_784.pdf

Jan 28, 2011 | Yamaha YZ 450 F Motorcycles

1 Answer

How lbs. torque is necesary for top end? for kxf 250 05


Torque - 10 mm Cylinder Head Bolt : 49 N·m (5.0 kgf·m, 36
ft·lb)
Torque - 6 mm Cylinder Bolt : 12 N·m (1.2 kgf·m, 104 in·lb)
6 mm Cylinder Head Bolt : 12 N·m (1.2 kgf·m, 104 in·lb)

Dec 25, 2010 | 2004 kawasaki KX 250 F

1 Answer

Head bolts tightening torques??


Auto Decompressor Bolt 104 in·lb
Cylinder Head Cover Bolts 87 in·lb
Cylinder Head Bolts: M10 36 S
M6 104 in·lb S

May 25, 2010 | 1999 kawasaki ZX-6R Ninja

2 Answers

2001 kx 250 head torque spec


Auto Decompressor Bolt 104 in·lb
Cylinder Head Cover Bolts 87 in·lb
Cylinder Head Bolts: M10 36 S
M6 104 in·lb S

Dec 23, 2009 | 2003 kawasaki KX 250

1 Answer

What is the torque settings for a head on a bmw 318is e36


BMW cylinder torque setting all models According to my service manual as follows. Cyl head to engine block (torx e12 M10 bolts) Stage 1 30nm (22 ft ? lb) Stage 2 + 90 degrees Stage 3 + 90 degrees Cyl head to lower timing chain cover 10nm (89in ? lb) The tightening sequence is from inside to outside crossover as normal. Loosening sequence is from outside to inside crossover. Remember to set torque wrench at low setting and work gradually up through the whole sequence until you get the desired torque.

Apr 23, 2009 | 2003 Harley Davidson FLSTC Heritage...

1 Answer

91 kx 250 torque values


Engine Top End:
Auto Decompressor Bolt 104 in·lb
Cylinder Head Cover Bolts 87 in·lb
Cylinder Head Bolts: M10 36 S
M6 104 in·lb S

the S in that means the specified pattern ... just like tightening car tire bolts... please note all that it its INCH lbs....

don't know why it says just 36 for the M10 bolts unless they left out inch lbs

Anything else let me know as i've got a manual for the 250 f... actually i've got a few different ones

Robert

Please take a moment to rate this solution as i've taken a few minutes to find the manual thanks

Jan 28, 2009 | kawasaki KX 250 Motorcycles

Not finding what you are looking for?
2000 kawasaki KDX 125 Logo

1,234 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4481 Answers

Angelo Stewart
Angelo Stewart

Level 2 Expert

224 Answers

yadayada
yadayada

Level 3 Expert

61168 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...