I have a tach that has 5 wires orange orange with white strip ,black green ,and light black .....help
SOURCE: How to wire a tach on 05 heritage softail
Locate & route Black lead to ground / 2004-later softail: On the frame strap under the seat directly in front of the battery.
Locate & route the pink lead to Signal / For 2004 & later FXST/C/I The #3 cavity in the connector {39b} on the back of the speedometer. The socket terminal on the signal (pk) lead fits the #3 cavity.
Locate & route the Orange and white lead to power / Ummm.. it's saying for 2004 and later to adapt to the fuse block For earlier [ For 1996 to 2003 softail: locate the power lead (o/w) in the tail lamp pin connector {7a} under the seat behind the right rear corner of he battery.] "here you are looking to run it to a fused line, not directly to power/battery" I hope this helped.
SOURCE: hooking up a tach on a 89 harley sportster 883,
Most aftermarket tachometers will employ a 3 wire system. A "power" wire, a "signal" wire and a "ground" wire. On a stock Sportster's ignition coil there will be 2 terminals/posts. 1 post will have a set of white wire on it the other a blue or pink wire. White is switched 12VDC (vehicle power) and the blue/pink is the secondary side of the coil (signal). I'd really need more information to be most helpful.
190 views
Usually answered in minutes!
×