Question about 1992 kawasaki ZXR 750

1 Answer

No power to fuel pump

Fuel pump stoped so i got a new one now there is no power to the pump

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 137 Answers

Hi there,,there are fuses or fuse 4 the pump,, have a quick check of them,, but could be
a break in the pump wire between the ignition and the pump,, follow the the wire from the pump to the block connector,, check that its connected and not gone green coroded,,
from the block connector u just checked,, follow to the ignition, usally there will be another block connector,,,,if all is cool, and clean,, this isnt recommended mate,, but to try it run a wire from the battery or a power source from the ignition ,which would be best,, from the ignition, to the pump,, ignition would switch pump on, and off wen not using it,, but from the battery it would keep pumping when switched off,, ,,

Posted on Dec 27, 2008

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Everything has power to fuses except the fuel pump? new battery.

Hi, Ben you need a wiring diagram you may have a faulty fuel pump relay behind the right side cover for this scenario you will need your service/owners manual if you can not find the first and best tool you ever bought for your Harley, despair not, for a mere $5 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below and for more specific information or questions at no charge please feel free to contact me at Good luck and have a nice day.
2009 Harley Davidson FLHTCU Ultra Classic Electra Glide fuel pump relay...
Harley Davidson Manuals Mark Workshop
Instant Tech Relief A must have !!! only $6 a month "CHEAP"

Sep 17, 2016 | 2009 Harley Davidson FLHTCU Ultra Classic...

1 Answer

2005 Kawasaki Ninja ZX10R wont start- this is what happens: turn key to "on" position all lights and guages work, the starter will engage/cranks not hearing any sound from fuel pump when key

hi there has this fuel pump been sitting for a while dry if it has it could have seized this up put some fuel in the out end of the pump and see what happens let it soak and check that there is power to it ,even if it has had fuel in them it can be that the fuel has left a sticky brown gunge in the pump which you may be able to wash out ,if not it could mean a new pump as i have had the same problems with other fuel pumps ,cheers pete

Mar 12, 2014 | 2005 kawasaki ZX-10R

1 Answer

Cushman truckster suzuki660 throttle body stalls dies backfires no power

It could be many different things. Check Fuel pump, make sure you have clean fuel filters, spark plug... make sure your getting fuel coming out of fuel pump by disconnecting fuel line coming OUT of pump & start Cushman if fuel comes out steady stream pump works good. Add some Fuel Stablizer w/ new gas this will help your fuel system dramatically..

Jun 17, 2012 | 1993 Suzuki GSX 600 F (Katana)

2 Answers

My bike will not start, no fuel is getting to the caburater, there use to be a sound right after i turn the key on, but that has stoped,all the fueses are ok, my name is john, hope this is simpel.

Your bike uses a fuel pump which was the origin of the noise you used to hear. Now your pump has died and must be replaced.
This is how the pump is mounted, how you remove the tank coder to access it and where to order a new one 

Jul 13, 2010 | 1993 BMW K 1100 RS

1 Answer

2004 Lightning XB9S: hello, my problem with my bike is Yesterday, i...

Behind the peg mount on the shifter side of the bike there is a plate that bolts into the frame. This is the fuel pump. there is an allen or torx screw in this plate that is the closest thing you will find to a fuel drain.

May 17, 2010 | 2004 Buell Lightning XB9S

1 Answer

Put new set of plugs in it couple of days later it cut down in power, brought it home and stoped it tried to start ot again and it wouldnt fire the engine it would just churn and back fire took out the new...

Assuming it ran well before you installed new plugs, it sounds as if you installed plugs with an improper heat range. Black sooted up plugs indicates a too rich fuel mixture. If you have the proper plugs, check to be sure the plug wires are tight on the new plugs. Crossed plug wires could also cause backfiring.

Dec 30, 2009 | 1992 kawasaki ZXR 400

4 Answers

Bike was running zx6r f2 model 1996 no bother now wont start got spark cleaned carbs,but wont go even with easy start doesnt seem to be taking in fuel even though the carbs are filling up checked valve...

hello this is only a solution

try putting a new float in the carb and check that it isnt flooded or the carb housing is cracked because it could be sucking in air some where and make sure its the right carb for the bike

if this dosent work the cheapest way it to make the valve clearance right as it says in the manual then try it if still not try bumping the bike if this dosent work just ask again

thanks hope it helped

Dec 06, 2009 | 1996 kawasaki ZX-6R Ninja

Not finding what you are looking for?
1992 kawasaki ZXR 750 Logo

Related Topics:

344 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4481 Answers

Angelo Stewart
Angelo Stewart

Level 2 Expert

224 Answers


Level 3 Expert

61168 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides