-
Chrysler Master
85,242 Answers
- Posted on Aug 23, 2012
Re: remove starter from 300touring 2006
Instructions- Lift the hood and find the battery. Disconnect both battery cables, starting with the negative cable first. You will need an open-ended wrench to loosen the nuts on the cable ends.
- 2Jack your Chrysler up. Place it on jack stands, placing the stands under the frame. Locate the old starter on the bottom of the engine. Remove the heat shield from around the starter and remove the two wires running to the starter.
- 3
- Remove the three bolts holding the starter to the engine. Turn the starter toward the engine and pull the starter out. The starter must be in the right position to get it past the motor mount. Work the starter down and out, then lay it aside. The starter has a core value you will get back when you return it to where you purchased it.
- 4Work the new starter back up past the motor mount and put the starter in place. Be sure to line up the starter shim and replace all three bolts. You will need a socket and extension and a ratchet to replace the bolts.
- 5Replace the two wires to the starter. Double check all bolts to ensure they are tight. Replace the heat shield around the starter. Jack up the vehicle and remove the jack stands from under the frame. Let the car down.
- 6Clean both battery cable ends. Replace them on the battery and tighten with a wrench.
×