Question about 2002 Honda NX4 Falcon

2 Answers

High beam shuts off when on for a long time ford ed falcon

Hi i have a 1994 ford ed falcon. everytime i use the driving lights they work fine but when i turn them on high beam they flicker then shut off both low beam and high beam. only way to get them back on is to turn everything off. ive had a couple of people look at it and have replaced fuses, cleaned terminals, changed bulbs. but they continue to do it.....

Posted by on

  • Anonymous Mar 18, 2014

    screeching noise on start up

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Try changing your high and low beam relays, and maybe install a relay for each light, all fords have the same problem

Posted on Dec 22, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

It is the 40 amp circuit breaker causing it not the relays.

Had the same problem with mine.

Posted on Dec 09, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dipped headlights


Did you check if one of the bulb elements are burned out?

The single head light has two elements (high beam and low beam).
Usually, you ride with the low beam on all the time, so it's the first to burn out, leaving the high beam still working.

If the tail light/brake light is a single bulb, same thing.

Nov 24, 2013 | Suzuki Motorcycles

1 Answer

My Dorso 750 which I bought 2nd hand headlight stop working a few days ago and I thought I blew a bulb. Took it the dealer and they found the socket melted and was told that the previous owner changed the...


Hi, Anonymous I would look for melted wires in the high beam light circuit, for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix/test or parts inquiry. If necessary transport your vehicle to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day. DOWNLOAD 2011 Aprilia Dorsoduro 750

Aug 15, 2013 | 2011 Aprilia Dorsoduro 750

1 Answer

R1 high beams work low beam does not


Hi, Anonymous you may have a faulty hi / lo beam switch if your headlight is not working, keeps burning out, blinking, or is dim the first thing you need to check is the headlight bulb for damaged filaments then check your light circuit fuse, then check your head light bulb socket ground wire for a clean tight connection, that being said the usual suspects are:
1. Faulty ground or power supply wire to headlight bulb socket.
2. Worn down solder contacts or loose fit of the bulb base in the socket due to vibration.
3. Worn, chaffed, or broken wires in the light circuit.
4. Corroded, broken, or loose pins/sockets in wire connectors.
5. Faulty hi/lo beam switch.
6. Faulty ignition switch.
7. Fuse is good but no continuity on both sides.
8. Faulty wiring between battery positive and headlight bulb socket.
9. Weak charging alternator/generator.
10. Faulty voltage regulator/rectifier ground or overcharging.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
http://www.r1-forum.com/forums/101-98-99-r1-mechanical-help/344116-no-low-beams-high-beams-working-fine.html
http://www.r6-forum.com/forums/50-appearance-exterior-mods/94126-high-beams-not-working.html
https://r1videos.files.wordpress.com/2011/04/2002-2003-yamaha-r1-service-manual.pdf
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Apr 20, 2012 | Yamaha YZF-R1 Motorcycles

1 Answer

Have xjr1200 1997 i have twin headlights but there is no low beam,I have high beam and pass lights ,the fuses are fine and i have multi-tested the block connectors without bulbs they all have power but...


hi...yes the high beam & pass light use the high beam element in the bulb....no this sounds a bit daft/obvious....but have you changed/check#ed the bulb...the low beam element hasnt blown...has it???...for the price of a bulb i would change this...hope this helps

Mar 09, 2010 | 1997 Yamaha XJR 1200

2 Answers

My high beam light(s) on 1994 Honda gold wing GL 1500


They are the same. It is one bulb with two separate elements high and low. You have to replace the bulb. kind of hard to explain how to do it though.

Nov 02, 2009 | Honda GL 1500 Gold Wing Motorcycles

1 Answer

84 honda shadow 700 vt lights are unpredictable


There seems to be some short in the circuit of the high beam, you will have to follow the high beam wiring, best would be to get the color of the high beam wire frm the head light bulb socket and trace it along you will sure find somwhere the along it the short.
Check the light switch and the blinker switch too.
Hope this helps!

Jun 25, 2009 | 1984 Honda VT 500 C Shadow

1 Answer

Only one headlight is on.... Is that right?????


That is correct,The one light is a daytime driving light to make it easier for traffic to see you coming.It also works as the low beam a night,The high selection turn both on.

May 07, 2009 | 1989 Yamaha FZR 600

1 Answer

High Beam Inoperative


test the bulb ... the hi beam portion of the headlight could be burnt out

Mar 10, 2009 | 1994 Yamaha XV 535 Virago DX

2 Answers

CBR 600 rr 04 lights and bike die when switched to high beam


There is a direct short in the bar switch or in the head lamp bucket check the wiring

Jan 22, 2009 | 2004 Honda CBR 600 RR

Not finding what you are looking for?
2002 Honda NX4 Falcon Logo

351 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4497 Answers

yadayada
yadayada

Level 3 Expert

64052 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...