Question about Yamaha XJ 650 Motorcycles

1 Answer

Where is the idle screw on 1982 maxim 650 motorcycle

Where is the idle screw on the carburators

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Yamaha Master
  • 53,266 Answers

Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
1982 yamaha 650 maxim idle screw location Google Search
Carburetor Sync Yamaha 650 Maxim 1981
Yamaha XJ750 Owners Workshop Manual
OEM parts for Yamaha
http://www.carlsalter.com/pdfs/Yamaha_XJ600SK_Owners_Manual.pdf

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Posted on Jun 21, 2016

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
bennito10
  • 51 Answers

SOURCE: I wanted to know how to turn down the idle

hello
if you were to look upward under the carbs, about center between the middle two carbs you should notice a screw with a larger head on it. this is the idle adjusting screw. hope this helps.

Posted on Mar 27, 2009

  • 50 Answers

SOURCE: flaot setting for 81 yamaha 650 maxim (4 ea.)

# 1carb left 0.04+or-0.04 inches mm 1.0+or-1.0 # 2 carb right 0.08+or-0.04 2.0+or-1.0 hope this gets you there

Posted on May 30, 2009

jmgldsmth
  • 2005 Answers

SOURCE: I just bought a 1982 yamaha maxim 650 and was

Change oil and, filters regularly; lube the throttle cables and, all moving parts drain the fuel tank and, replace the fuel filter every year, or; when needed. never leave fuel in the bike when you store it without using "stabil" only check your ignition with a timing light get a maintenance schedule from the bike's manufacturer and, follow it.

Posted on Aug 02, 2009

SOURCE: looking for a carberator diagram for a 1982 yamaha

plz visit this site http://www.drpiston.com/Hitachi_23.html

Posted on Jan 18, 2010

  • 1 Answer

SOURCE: i have an 81 yamaha 650 maxim that will only idle

just had that same prob and we cleaned the carb and works great but the rpm's go up and down from 1 to 3 u can ride but very unsafe why could this be?

Posted on Mar 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1982 Yamaha 650 maxim begins to rev around 4,000 rpm after it warms up for under 5 minutes. I have tried carb cleaner. Can anyone help?


Hi, Anonymous and the usual suspects are:
1. Throttle cables improperly adjusted or pinched.
2. Idle adjusting screw needs to be backed off.
3. Intake system air leak.
4. Fast idle choke ramp is not releasing.
5. Broken throttle return spring.
6. Damaged diaphragm or slide.
7. Faulty MAP, TPS, ATS, O2, VSS sensors or wiring/connector
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Xj650 HIGH IDLE puts itself to full throttle
HELP My bike idles at 4000rpm
Yamaha XJ750 Owners Workshop Manual
OEM parts for Yamaha
http://www.carlsalter.com/pdfs/Yamaha_XJ600SK_Owners_Manual.pdf

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Sep 02, 2013 | 1982 Yamaha XJ 650

1 Answer

My 650 will rev really high when started or not start at all


Hi, Jared and the usual suspects are:
1. Throttle cables improperly adjusted or pinched.
2. Idle adjusting screw needs to be backed off.
3. Intake system air leak.
4. Fast idle choke ramp is not releasing.
5. Broken throttle return spring.
6. Damaged diaphragm or slide.
7. Faulty MAP, TPS, ATS, O2, VSS sensors or wiring/connector
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Yamaha XJ650 Idle Problem
1982 Maxim xj650 idle issues
Yamaha XJ750 Owners Workshop Manual
OEM parts for Yamaha
http://www.carlsalter.com/pdfs/Yamaha_XJ600SK_Owners_Manual.pdf

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Dec 01, 2012 | 1980 Yamaha XJ 650

1 Answer

Hi, my yamaha maxim 650 will start but will not idle off choke or stay running off it or when i give it alot of gas. could it be the petcock? or the throttle adjustment screw?


Hi, Alexmacy and the usual suspects are:
1. Fuel cap or fuel tank is not venting properly.
2. Fuel filter clogged.
3. Fuel line pinched or kinked.
4. Float needle and seat sticking.
5. Float level too low.
6. Carburetor bowl vent line clogged/blocked/pinched.
7. Idle adjusting screw set too low.
8. Air/fuel mixture screw set too lean.
9. Idle port, transfer ports, slow air jet clogged.
10. Slow fuel jet clogged.
11. Faulty fuel pump.
For more information about your issue and valuable "Free" downloads that you will need please Click on the links below. Good luck and have a nice day.
Yamaha XJ650 Idle Problem
1982 Maxim xj650 idle issues
http://www.sloneservices.com/SilverBack/Other-Stuff/V-StarShopManual99-07.pdf
OEM parts for Yamaha
https://dd5394a0b8ca8e97ba29-abf76f3d91a2125517d6c7c409f095c7.ssl.cf1.rackcdn.com/content/common/manuals/1999/LIT-11626-12-30_126.pdf

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

May 16, 2011 | 1981 Yamaha XJ 650

1 Answer

I have a yamaha xj650 maxim which was a project of mine and it will not idle below 2500 rpms. There have been many add ons though 4 to 1 exhaust free flow air filters clean carbs added stage 3 dyno jet kit...


I would recommend adjusting the idle screw on the carb. If it is not the idle adjustment, then check the choke as it may be sticking and that will cause the engine to idle at that rate.

Feb 28, 2011 | 1982 Yamaha XJ 650

1 Answer

I just bought a used 1982 Yamaha 650 Maxim. It had been sitting for some time and the Carburetors were badly varnished, so I went in and cleaned everything. I then replaced the badly dry rotted manifold...


You will have to check the float level of the carburators and hope you had used compressed air to blow out the jets!
Best still is to visit this site for more info...theres plenty in there for our type of bikes mine is XJ750RH.
Good luck.
www.xjbikes.com

Jun 23, 2010 | 1982 Yamaha XJ 650

1 Answer

83 maxim 650 ,no idle -hard to start


how do you ajust the ignition timing as its started pinking a bit

Jun 19, 2010 | 1982 Yamaha XJ 650

1 Answer

Maxim xj750 1982 = Feels like it's running on 3


Time for carburators clean up and synchro please visit this site..theres alot of info inthere !
www.xjbikes.com

May 29, 2010 | 2001 Yamaha TW 200

1 Answer

82 yamaha maxim 650 engine is hard to start cold runs on choke and is hard to throttle up off idle will stall but an be featherd up but not easly


weak mixture,dirty fuel,air leaks on induction manifolds,jets blocked,fuel tap filter chocked,float needles sticking,fuel level in carb incorrect,thottles not opening together,air leaks at exhaust pipe joints,

Apr 11, 2010 | 1982 Yamaha XJ 650

1 Answer

1982 XJ 650 maxim cylinder 2 & 4 won't run


Are you saying that 2 & 4 got gas with external tank but not with gas tank? If so something else has happened ,if gas is getting to the carb it cannot by-pass 2 to get to 1. Take the tank back off ,connect to external, again. See what happens.

Sep 11, 2009 | 1982 Yamaha XJ 650

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

419 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

vince

Level 3 Expert

1234 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1165 Answers

D. E. Hev

Level 3 Expert

1187 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...