Question about 2003 Honda VTX 1300 Retro

1 Answer

What size are the 4 front fender to forks bolts on a VTX 1300 R

The bolts in question are the 4 (2 on each side) bolts that hold the retro front fender to the forks. Thank you.

Posted by on

  • Anonymous Mar 19, 2014

    the front cylinder on driver's side (gray non-shiny) Its right next to bolt that attaches jugs. Looks like someone may have tried to disguise the hole and the metal putty depressed in a half inch about the size of a dime. It runs great, but it looks bad. I have pictures I can send

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 101 Answers

Hi ........ What are the head sizes ? 10mm (m6 x 1.0), 12mm or 13mm (8mm x 1.25), 14mm (10mm x 1.50) .......... Good Luck.

Posted on Dec 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where do you get the overall height measurement at


3 measurments here
*static height-
*dynamic height-
*suspention height(extended fork length)

static height is measured with a plumb line to the ground at the center of the fork tube top with the motorcycle standing upright and no rider on on it

*dynamic height is the same except your sitting on the motorcycle.

*suspention height /extended fork length is with the front wheel off the ground and measured from the center of the front axle to the top of the fork tube.if tube cap/valve is recessed you still use the top of tube measurement but if it has a cap that screws in on top of the tube then imagine the fork cap removed (measurement stops at the top of tube itself.(most always)

Mar 01, 2012 | 2004 Honda VTX 1300 Retro

2 Answers

Where can i buy a 2004 1300 vtx starter switch cheaper than a dealer


http://shop.ebay.co.uk/i.html?_nkw=HONDA+1300+vtx+starter+switch&_sacat=0&_odkw=1300+vtx+starter+switch&_osacat=0&_trksid=p3286.c0.m270.l1313

Good old ebay.

Jan 26, 2011 | 2004 Honda VTX 1300 Retro

1 Answer

Fan cuts in and out all the time


My 2003 1300 vtx s did this for a long time especially at slow speeds.Ireplaced the thermo switch but to no avail. Later I bobbed the bike {cut back fenders for a older look}and low and behold the fan hardly comes on any more at all.Ibeleive the big oversized front fender was the culprit because my 2004 c with small front fender has never had this problem.

Dec 04, 2010 | 2004 Honda VTX 1300

1 Answer

2004 honda vtx 1300 c stalls out after down


ever drain your carbs ? should be done seasonally . fuel filter problem, sounds like it is running out of gas.

Oct 10, 2009 | 2004 Honda VTX 1300 Retro

1 Answer

Need torque specs for the triple tree bolts holding the fork tubes top and bottom. 2009 Honda VTX 1300 C


20 nm on all of them this may not seem alot but the clamps bend over the forks and clamp onto them many thanks buddy

Sep 12, 2009 | 2005 Honda VTX 1300 C

1 Answer

2004 Honda VTX 1300c. How much oil does it hold


3900ml, you should try some of the Castrol V-Twin oil, good stuff.

Jul 02, 2009 | 2004 Honda VTX 1300 Retro

1 Answer

What is the easiest way to drain gas out of a VTX 1300 retro


You must turn your gas tank upside down to drain it.

May 17, 2009 | 2005 Honda VTX 1300 R

1 Answer

( I'm Spanish..and leave in Spain)..well...I go change the front whell of my VTX 1800C'02...my mechanic..d'ont know the size of original rim...¡ and I..so ¡¡..(please,sorry my...


Here are all the specs for your bike,Please take time to rate this a fixya.

2003 Honda VTX1800 Retro Spoke
Engine Type: 1795 cc, 4 Stroke - Liquid Cooled - V Twin
Engine Bore and Stroke: 101 mm x 112 mm
Compression Ratio: 9:1
Valves SOHC, 3 valves/cylinder
Carburetion: Programmed Fuel Injection (PGM-FI) with automatic choke
Ignition system:Solid-state digital, two spark plugs per cylinder
Claimed Horse power:107 hp (79.8 kW) @ 5000 rpm
Maximum Torque: 163 Nm (120.2 ft. lbs) @ 3000 rpm
Transmission type: 5 speed
Drive:Shaft
Starting: Electronic

Suspension - Front: 45mm inverted fork, 130 mm travel
Suspension - Rear: Dual shocks with five-position spring-preload adjustability, 100 mm travel
Front Fork - Rake & Trail Angles: 32 / 163 mm (6.4 inches)

Tire- Front: 150/80-17
Tire - Rear: 170/80-15
Brakes- Front:dual 296 mm discs with 3-piston calipers
Brakes - Rear: single 316 mm disc with 3-piston calipers

Overall - Length: 2456 mm (96.7 inches)
Overall - Width: 932 mm (36.7 inches)
Overall - Height: 1128 mm (44.4 inches)
Seat Height: 693 mm (27.3 inches)
Wheelbase 1715 mm (67.5 inches)
Ground clearance 130 mm (5.1 inches)
Fuel Capacity: 17 l (4.5 Gal)
Dry Weight (without fluids): 320 kg (705.5 pounds)

May 16, 2009 | 2003 Honda VTX 1800 Retro Spoke

Not finding what you are looking for?
2003 Honda VTX 1300 Retro Logo

Related Topics:

150 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4471 Answers

yadayada
yadayada

Level 3 Expert

60769 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...