FLHRCI with Dunlop 402 tires
SOURCE: Tire Replacement
ME880 is the Metzler you're looking for. It comes in black, and wide white wall. I have it for my back tire. Haven't worn out my front enough to get a match on the front yet, but I'm working on it! They are a huge improvement over the dunlops
SOURCE: Will an AVON 150 fit the rear of my 2000 Road King ?
the name and the price I myself prefer avon over any other a 150 is pretty wide measure the tire you have now and see how wide it is the 150 should work
SOURCE: adjusting rear tire
is it rubbing all the time when you spin the wheel or is it as if the wheel is buckled? or could it be bearings in your wheel. (any side to side movement in it) if not then gotta be tire not seated correctly, you will see this though if you examine it along the rim on both sides, OR the shop put a tire on that was too wide, with either of these tire problems i suggest you go back to the shop that installed it, to re seat it you will have to remove the wheel and deflate tire fully, break the bead seal against the rim. then re-inflate carefully to seal it against the rim, give it a few bounses to help saeting correctly.
SOURCE: New Tires on my 2000 Road King... HELP!!!
I know a lot of guys switch to the metzler and the michlens and the do get longer wear, but you give up some handling.
SOURCE: will a larger rear tire on my 2003 road king
About the largest you want to go without any modifications...and it can be a tight squeeze is a 140/ or a MU- . You can purchase for upto a couple of grand after market wide tire kits to run like a 180. I may be wrong but I do not think Harley offers a Wide Tire Installation Kit
for your bike any longer. hope this helps,
JP
Fitment for 1999 XL Tubeless Cast Wheels:
Wheel Position and size = 19 inch Front; Rim Size and Contour = T19x 2.15 MT; Rim Valve Hole Diameter = 0.45 inch; Tire Size = Dunlop D401 ELITE S/T 100/90-19
Wheel Position and size = 16 inch Rear; Rim Size and Contour = T16 x 3.00 D; Rim Valve Hole Diameter = 0.35 inch Tire Size = Dunlop D401 ELITE S/T 130/90-16
Wheel Position and size = 19 Inch Front; Rim Size and Contour = T19x2.50 TLA; Rim Valve Hole Diameter = 0.45 inch Tire Size = Dunlop K591 S&FR Elite SP 100/90-V19
Wheel Position and size = 16 Inch Rear; Rim Size and Contour = T16x3.00 D; Rim Valve Hole Diameter = 0.45 inch Tire Size = Dunlop K591 S&FR Elite SP 130/90-V16
Tire Fitment for 1999 XL Tube Laced Wheels:
Wheel Position and size = 19 Inch Front; Rim Size and Contour = T19x2.50 TLA; Tube Size = MJ90-19 Tire Size = Dunlop D401 ELITE S/T 100/90-19
Wheel Position and size = 16 Inch Rear; Rim Size and Contour = T16 x 3.00 D ; Tube Size = MT90-16; Tire Size = Dunlop D401 ELITE S/T 130/90-16
Wheel Position and size = 21 Inch Front; Rim Size and Contour = T21x215 TLA; Tube Size = 3.00 x 21; Tire Size = Dunlop Touring ELITE II MH90 - 21 56H
Wheel Position and size = 16 inch Rear; Rim Size and Contour = T16x 3.00 D; Tube Size = MT90-16; Tire Size = Dunlop Touring ELITE II MT90 - B16
Tire Pressure - All Models:
Cold up to 300 Lb. Load (includes rider, passenger and cargo)
Front = 30 psi (2.1 bar)
Rear = 36 psi (2.5 bar)
Up to GVWR maximum load
Front = 30 psi (2.1 bar)
Rear = 40 psi (2.8 bar)
294 views
Usually answered in minutes!
×