Question about 1984 Honda NS 250 R

1 Answer

Unsure about gas setup

Hey .. i just picked up a honda ns250r 1984 .. can you tell me if the gas mixture is premixed before i put it in the tank or will it mix itself... ps it is two stroke..and what oil do i use?...

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

 It has auto lube, the oil bottle is under the seat. Use any full synthetic 2stroke oil. Some bikes may have been modified to run on premix and this would be worth getting checked out by a bike shop. If its been sitting for a while its a good idea to put a tank full of 40/1 premix through it anyway.   Look after your bike, they are becoming very rare and many engine parts are no longer available. The NS was one of Honda's premium products, hence the "R". It had hand matched engine parts and was very expensive to produce.  There were only 35 new red/white bikes imported  into NZ in 1986, removed from the Japanese market  to make way for the NSR. All other NS's imported, blue/white, were second hand imports.   I have had mine from new and it was the first sold in NZ, prepaid before it landed. I have a factory Honda manual for the NS250R. I'm happy to help you with tech info you need. Just post your Q.

Posted on Dec 16, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

1984 Honda GL 1200 Aspencade Gold Wing how to drain the fuel tank

Hi, Anonymous for more information about your question and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Goldwing Aspencade GL1200 Gas Tank
Honda GL1200D Shop Manual
Honda GL1200 1986 Owner Manual

Apr 19, 2014 | 1984 Honda GL 1200 Aspencade Gold Wing

1 Answer

Oil to fuel ratio

Many of the 2 cycle motors use a 40:1 gas to oil mix. There should be a label on the motor that tells what the mixture should be. You also can buy a premixed container that has the gas ad oil mix all in one can. Just pour it in the gas tank, then pull the starter cord.

Mar 17, 2014 | Garden

1 Answer

Why does my 1984 Honda VF 500 F keep stalling when I come to a stop

Hi, Leatherne79 and the usual suspects are:
1. Idle circuit and transfer ports clogged.
2. Air fuel mixture adjustment too lean.
3. Pilot jet clogged.
4. Faulty accelerator pump.
5. Float level too low.
6. Float cracked, leaky or damaged.
7. Float bowl contaminated old fuel, water, dirt, rust, etc.
8. Float bowl vent or overflow tube clogged.
9. Fuel flow to carburetor restricted.
10. Intake manifold leak.
11. The gas cap is not venting properly or fuel tank venting system blocked.
12. Vacuum line from intake manifold to petcock broken, cracked, or not attached, carburetor vent line plugged.
13. Needle and seat stuck closed in the float bowl.
14. Multi carburetors not in sync.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
1984 Honda Interceptor VF500F Engine runs fine idles ok stalls in stop go
New owner rider 82 V45 Magna idling too low and stalling at stops Honda V30 Magna VF500C Manual
1984 Honda VF500F VF500FII Owner Manual

Oct 25, 2012 | 1984 Honda VF 500 F

1 Answer

1984 Honda CR80 will not start

Hi, Antonymace and the usual suspects are:
1. Fuel cap or fuel tank is not venting properly.
2. Fuel filter clogged.
3. Fuel line pinched or kinked.
4. Vacuum line from the petcock to intake manifold cracked.
5. Float needle and seat sticking.
6. Float level too low.
7. Carburetor bowl vent line clogged/blocked/pinched.
8. Idle adjusting screw set too low.
9. Air/fuel mixture screw set too lean.
10. Idle port, transfer ports, slow air jet clogged.
11. Slow fuel jet clogged.
12. Faulty fuel pump.
For more information about your issue and valuable "Free" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Cr80 Will not start
1985 cr80 not starting
Honda CR80R CR85R service manual repair 1995 2007 CR80 CR85 Download... $15

Sep 15, 2012 | Honda Motorcycles

1 Answer

What is the correct mixture for eb7000 blower? it ran perfect until i put in a mixture of all ratio oil mix gallon of gas to one oil will run it all... now it boggs out and sputters then stalls...

50:1 is the correct mixture. Every company has an oil they would perfer you use. Namely, the one they make. I would imagine that if it ran perfect before you put that premix in there, the premix is your problem, assuming no one "borrowed" it and straight gassed it. It also sounds like once it gets warmed up, it begins to fail. I would do a compression test once it gets warmed up. Also, you could pull the spark plug, grab a flashlight, and see if you notice any scoring on the cylinder.
Here is a link for the manual, in case you lost yours.

Nov 24, 2010 | Garden

1 Answer

Gas oil mixture

The header says that it is an electric saw which would only require bar oil. A 2-stroke gas engine, however, does require fuel mixed with a modern saw oil at 40:1 ratio plus bar/chain oil in it's own tank as well. Always premix the fuel and oil in a separate can and shake well even before filling the saw. Hope this helps!

May 24, 2010 | Homelite Consumer Products 9.0 Amp, 14 In....

3 Answers

I just bought a 1984 suzuki rm 250, this is my first 2 stroke, what mixture should I use?


Aug 25, 2009 | 2003 Suzuki RM 250

2 Answers

How do I remove the false gas tank on a 1984 honda goldwing

You can pick up a complete owners/service manual as well as the parts manual on cd. I got mine for my GL1100, then when I upgraded to my GL1200, I picked up another set from the same person.
Contact Wanda G at I believe she still sells the cd's for around $7.00 including the shipping anywhere in the US.
When I got mine, she included both the owners/service manual and the parts manual. Pretty big to download, at around 200mb.
Manuals are good enough, I just rebuilt my engine, and all 4 carbs and I'm no mechanic.

Mar 30, 2009 | 1984 Honda GL 1200 Aspencade Gold Wing

1 Answer

Unsure about gas setup

Hi and welcome to FixYa,

It would appear that there are 2 questions/users on this post. Still, on your bike, normally, the tank hold plain gas, not premixed. The 2-stroke oil (2T) has its own reservoir attached to the right side, on the frame. The filler would be exposed and relatively easy to access and fill up.

On the Gearbox oil for 2-stroke engines with a wet clutch, SAE 10W40 is the standard.

Good luck and Thank you for using FixYa.

Jan 05, 2009 | 1986 Honda NS 250 R

Not finding what you are looking for?
1984 Honda NS 250 R Logo

248 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4585 Answers


Level 3 Expert

78010 Answers


Level 2 Expert

342 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides