Question about 2006 Yamaha XT 125 X

1 Answer

Tools needed what tools do i need to change the oil on my xt125

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 101 Answers

Get yourself a good quality tool kit/socket set, in your case for this bike a metric one. Good quality oil (or change sooner, 1500-2500 miles, try Morrisons 10/40), oil filter (every second change), paddock stand, a bin bag and two old 5 litre oil containers. Take one of the containers and cut a 'window' out of one side and place it under the bike and sump, with the bin bag under the oil tin. Level the bike on the stand Warm up the engine and after making sure you can take off the oil top up cap, remove the oil drain bolt (with the correct/tight fitting socket) in the sump (bottom of the engine). Keep upward pressure on it as it gets to the end and make sure any washer fitted comes with the bolt. Allow the oil to drain into your adapted oil container which you've placed under the bolt hole. If your changing the filter now is the time to do it, remember oil will still be in here too so catch as much as you can in your container. Once the oil has drained put the bolt back on (not too tight) and fill to the correct level as indicated in the sight glass or dipstick. Whilst keeping your container level pour the oil into your second 5 litre can (and when full take that to be recycled).

Posted on Dec 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i change from mph to kmh on a yamaha xt 125 r


Hi, Anonymous sorry you can't find the first and best tool you ever bought for your Yamaha despair not for a mere $10 you can download another one. For more information about your issue and free downloads that you will need please visit the websites below. Good luck and have a nice day.XT125X Speedo programming
http://www.ukgser.com/forums/showthread.php/116067-HELP-kph-to-mph-on-Yamaha-XT125X
Spare parts for Yamaha XT125 Trail
http://www.motogelnar.cz/manual/YAMAHA/DT125X_RE-05-Service_Manual.pdf

Jan 14, 2016 | Yamaha Motorcycles

2 Answers

Mikuni ucal carburetor pipes diagrams


Hi, Anonymous sorry you can't find the first and best tool you ever bought for your Yamaha despair, not for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please visit the websites below. Good luck and have a nice day.
http://www.motogelnar.cz/manual/YAMAHA/DT125X_RE-05-Service_Manual.pdf
OEM parts for Yamaha
http://www.dt125.cz/download/Owners_Manual-DT125X_RE.pdf
Yamaha DT 125R
http://www.dirtntrial.com/tuning.htm

May 18, 2014 | Yamaha DT 125 R Motorcycles

1 Answer

Yamaha xt125 x will go into gear but won't drive


Sounds like your clutch is way out of adjustment ... or ... worse ... gone.

Jun 20, 2013 | Motorcycles

1 Answer

Need a wiring diagram for xt125 can any1 help?


try this site sir http://diagramwiring.net/?s=2007+Yamaha+XT+125+R

Apr 28, 2011 | 2007 Yamaha XT 125 R

1 Answer

Need wiring diagram for xt125r 2009 had wiring cut by someone


I had same problem with my xt125 r 2009. Loads of wires cut. I said 2 yams it us a disign fult so they fix it 4 free. Is there any1else who has same problem with same bike n year?

Jan 13, 2011 | 2005 Yamaha XT 125 X

1 Answer

I need to change the oil


no special tools needed, remove lower plastic ,undo drain plug ( probably 14mm wrench),drain oil into a non food container, undo filter with a filter wrench or by hand, refit new filter, refit drain plug, add 10w40 oil of your choice ( not car oil !!) probably approx 4 ltrs , check level is halfway on site glass on crankcase.if all is tight start bike check for leaks refit plastic.. brake fluid is probably DOT 4,

Oct 10, 2009 | 2004 kawasaki ZX-6RR

1 Answer

How do i change the front sprocket on a Kinroad XT125-16?


Remove the sprocket cover plate then remove the bolt or keeper clip holding the sprocket on the shaft. Switch sprockets and your'e done. Pretty simple.

May 04, 2009 | 2000 Aprilia RS 125

1 Answer

On a Yamaha XT125 I'm thinking of changing the exhaust system, on the original ther is an offshoot ofrom the main downpipe which goes into the egine, on the new system this fitting is not there, what is it...


my speedo clock is not working , the lights on the side are e.g for if it is in nuteral and ive checked the wireing and disconnected it for 5 min and put it back on but still nothing do you have any other ideas o what it could be ? thanks

Apr 18, 2009 | 2006 Yamaha XT 125 X

Not finding what you are looking for?
2006 Yamaha XT 125 X Logo

265 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1128 Answers

D. E. Hev

Level 3 Expert

1059 Answers

mikeuk

Level 2 Expert

61 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...