Question about 1989 kawasaki GTR 1000

1 Answer

1989 kawasaki police 1000 carberator hose routing

Im working on this police 1000 and it has 4 carberators i know where the main one goes but i cant place the four on top also how do i adjust the cluth on this bike also plesae help i would really like some pictures if possible cant find any thing on the internet for free just sites that want to sell me the diagrams in such

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 83 Answers

Here is the link to get all the parts you need and you can actually see a complete parts diagram for free. I highly recommend these people to buy any of your parts from.
http://partsfinder.onlinemicrofiche.com/cheapcycleparts/Kawasaki_OEM/KawasakiMC.asp?Type=12&A=528

Please let me know what you want to know about the carburetors, I have extensive service knowledge on this motorcycle.

Regards,
RSelvy

Posted on Dec 09, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where do i find carberator on zzr1100


You may check to see if the fuel valve is turned on. Usually on the left side of the tank, near the rear of it.

May 18, 2012 | 1991 kawasaki ZZR 1100

1 Answer

Need to download service manual for 2000 Kawasaki Prairie 400. didn't drain gas and it sat for 2 yrs. need to service so we can sell it.


Your carberators have now settled and there is tar, or "gunk" in your bikes fuel injectors inside your carbs. If you want to sell the bike the carberators MUST be rebuilt. You can get a service manual at Autozone etc. but you are not likely to be able to build the carbs correctly unless that is what you do for a living. It is tedious, delicate, and exacting work. There are VERY small parts, e.g. bearings, springs, and tubes. I highly recommend you have this work done. You can save a few bucks by taking them off and bringing them to the shop, but I believe that is all you are going to be able to do. Let me know if I can help further.Thanks for calling on FixYa,com

Apr 13, 2010 | 2000 kawasaki ZXR 400

1 Answer

No fuel on dodge ram 50


Its not grounded out, not enough power going to the carberator, or the fuel filter is stopped up

Jan 04, 2010 | 1989 Dodge Ram 50

1 Answer

My 89 toyota pickup 3.0 stalls unless i hold down the gas pedel until it gets warm then it runs fine. i changed the fuel filter and the mass air flow and checked the vaccum hoses for leaks.. Still nothing


hello. Your carberator injectors are partially gummed up. go to any auto parts store and get two cans of a product call seafoam. Follow the directions on the can regarding how much you use per gallon of gas in the tank. After you have run some seafoam through the carberator it will solve your problem.

Nov 25, 2009 | 1989 Toyota Pickup SR5

1 Answer

Is putting 1/4 worth of gas into any car carburator bad? please let me know


Thats the natural place for gas. If you add too much it will only flood out. Didn't know there was any cars left with a carberator.

Jun 29, 2009 | 1989 Mercedes-Benz 300-Class

1 Answer

Coolant fluid leaking below carberator 1989 dodge daytona


May not apply to yours, but I have seen coolant lines routed under intake (actually through plenum below carb)...the idea is to pre-heat and vaporize fuel to prevent "puddling" under carb. If you look at most v8 engines, exhaust is routed the same way, to do the same job. You may need to use a mirror to see under there to determine exactly what's going thats causing leak.

Apr 05, 2009 | 1989 Dodge Daytona

2 Answers

Kx 125 wont start


check air filter and drain old gas out

Feb 27, 2009 | kawasaki Full Suspension Mountain Bike Men

Not finding what you are looking for?
1989 kawasaki GTR 1000 Logo

478 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

67912 Answers

chris

Level 2 Expert

232 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...