Hi There
buy a toggle switch with 3pin
use small speaker wire attach it to red wire on unit (make sure to not UN hook red wire just add long enough speaker piece to red wire) attach it to toggle switch top (power logo) do the same for the black wire (ground) only put it in the ground on toggle switch (ground logo) attach the brake wire to the last open toggle switch turn it on and video appears while driving (follow logos on toggle switch) if this doesn't work switch the black and parking brake wires around on toggle switch
hope this helped
SOURCE: i need to know how to wire my deck.
buy a toggle switch
run a wire from the red wire located at the back of deck
to the deck and toggle switch (power to power on toggle switch)
do the same with the ground wire (black) (ground to ground on toggle switch) (make sure to follow logos on toggle switch)
finally install e brake wire to center pin on toggle switch
now you can watch make sure toggle switch is on
if this didn't work switch the e brake wire and black wire on toggle switch
good luck hope i helped
137 views
Usually answered in minutes!
×