Question about 1997 Honda CBR 250 RR

3 Answers

CBR 250 not starting

I recently bought a CBR 250 I took it for a couple of rides then the other day I tried to start it but no deal!!

I sounds like its trying to kick over but nothing happens, I cheacked the spark plugs but there fine.

Any idea??

Posted by on

  • Anonymous Dec 30, 2008

    99 cbr 250, just put fully charged battery into bike, and no lights coming on or anything tested battery and its full.Not even attempting to start?

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Ok i have got a 1999 cbr 250rr when i brought it i put in a brand new battery. took it for a ride and about 3 hours later the battery has died but not fully.. the lights and everything still come on but just wont turn over? what can i do to fix it?

Posted on Mar 27, 2012

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi there i have the same problem on my bike so i done a service i changed oil, oil filter and all four spark plugs and still nothing but as i think it could be leads coils or hope not but it sounds like cylinders are not firing and it may need a engine rebuild i wish you all the best and good luck fixing your bikes

Posted on Nov 26, 2011

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Sound like you have a fuel problem.Turn the key without starting the bike listen for a slight buzzing noise it will come from where the end of the tank and the seat meet this is the fuel pump priming if you can not hear anything then most likely your fuel pump is not working.Your carbi may have grit in a jet a carbi cleaner can help.
I hope this helps!

Posted on Dec 09, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lost my key to my 99 cbr 600 f4 bought a new honda ignition turn the key lights everything come on and I push the start button it turns over but won't start I think it's not gettin fire it's a us bike so...


try recharging the battery. Sounds like it could just be weak. Doubtful that anything associated with the new key if you get it to crank.

Aug 29, 2014 | Motorcycles

1 Answer

Please help I recently bought a 1999 gsx f 750


Sounds like something has come loose on the ignition trigger mechanism Check that fist.

Oct 26, 2013 | Suzuki Motorcycles

2 Answers

Hello i just bought a 1990 cbr250rr,its been sitting in some dudes garage.when i push the start button theres a tick tick tick coming from near the battery,perhaps from a black box that cables run...


I would replace the battery. Over time the cells of the battery can sulfate and cause it to not be able to keep a charge. First start it and with an ohm meter check that it is charging at at least 12.8 to 13.2 volts at idle. If it is it is the battery and it needs replacing.

Mar 02, 2011 | 1990 Honda CBR 250 RR

1 Answer

2001 Honda 929 not starting


sounds like it could have a blown solinoid fuse check fuses,sometimes the solinoil fuse is located on the solinoid itself.Could be A shot sidestand switch or clutch cut out switch.to check solinoid & starter motor.Place a jumper lead on Batt. posative,other end to solinoid if it tries to start check previously mentioned switches.If still nothing,conect to other side of solinoid,if motor sounds solinoid is the problem
Hope this helps Regards Andrew Porrelli

Nov 22, 2009 | 2001 Honda CBR 929 RR Fireblade

1 Answer

1992 Honda CB 250 Nighthawk Piston Problem.


Black exhaust is from too much fuel. You may have a carburator float sticking. That will cause excess fuel to go into the cylinder, and if it can't "compress" it, it will knock.

Oct 08, 2009 | 1992 Honda CB 250 Nighthawk

1 Answer

HondaCBR 250RR runs for 3 miutes fine then cuts out whilst riding


sounds like the float in the carb might be sticking stopping any more fuel getting through to the engine

Jun 23, 2009 | 1997 Honda CBR 250 RR

1 Answer

Cbr 125 choke problem


It sounds like the choke line may not have been routed correctly when the new one was installed. Remove the gas tank and check to see that the line is not being stretched anywhere along the way AND that the gas tank when re-installed is not stretching the line. The line may have been kinked when installed. Look at the mechanical movement of the choke at the carb. Does it operate freely? Remove the air filter and look inside the center of the carb, (you may need to use a small mirror for this), does it look like the choke is opening and closing properly when the choke is moved on and off?

Mar 13, 2009 | 2004 Honda CBR 125 R

1 Answer

Loss of power around 8 -10,000 revs in 3/4 gear


ello m8,,hows things,,clean out the air filter 1st, change all your plugs mr,try that , if nothing u will need to get the carbs balanced to by a bike shop,mechanic,,unless u have carb gauges,,, itl be easier if they do it,, try these 1st m8,, if no joy come back and il go threw step 2 with yuh,,

Feb 25, 2009 | 1991 Honda CBR 250 RR

2 Answers

CBR 250R Not Starting


you say its see its been serviced if i was you i would buy new plugs if that doesnt work try cleaning carbs and fuel filters and as to starting a 4 stoke they usualy need full on choke in cold weather when you buy plugs get a hotter rated plugs /before you try above take out spark plug/s and brush end that goes into engine with a small wire brush clean well then warm plugs with lighter or burner and replace then try to start bike

Jan 22, 2009 | 1997 Honda CBR 250 RR

Not finding what you are looking for?
1997 Honda CBR 250 RR Logo

714 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...