Question about Gilera Runner VX 125 Motorcycles

2 Answers

Gilera runner ignition

Hello, my gilera runner was stolen last night, i have recovered it back... but the main tube that is welded onto the frame that the ignition barrel fits in has been completly ripped off and is beyond repair! just want to know how do i fix this solution and get my bike back on the road???

Posted by on

  • smea4u Dec 08, 2008

    this mans a legend!!! top quality! id rate him anyday! many thanks fella!!!!!!!!!!!!

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 83 Answers

When you encounter this type of problem the best thing to do is find a fab shop that can reproduce the tube that was ripped away. I frequently did these types repairs when I was running my shop. It's not really that hard to do, you just need a lathe and some shop tools and a tig welder to fix it. If you have to pay to have it done it might cost about $100.00 plus you will need to replace the ignition that was destroyed.
I feel for you, most likely did not catch the thief either. If I still had my shop I'd fix it for free for you.
Good luck finding the fab shop you need.

Posted on Dec 08, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a legacy and it cut off sometime while ride and while standing still sometime starter switch do not hit rigth a way

Posted on Jul 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My gilera runner 125st 2008 when started and throttle is pulled back it just dies the power goes


Hi, Mark the following applies to carbureted also fuel injected models and the usual suspects are:
1. Severely discharged or a damaged battery, 9 volts or lower.
2. Faulty alternator/generator and or voltage regulator.
3. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Faulty main circuit breaker or ignition switch, check for loose connections and continuity.
5. Faulty system and or ignition relay, check for continuity.
6. Faulty ignition coil, ignition/electronic module.
7. Faulty CKP, CPS, CMP, MAP, TPS, O2, or BAS sensor, corroded, loose or broken wire connector pins/sockets.
8. Water or dirt in the fuel system, carburetor or filter.
9. . Restricted, blocked or kinked fuel line.
10. Fuel tank empty.
11. The gas cap is not venting properly or fuel tank venting system blocked.
12. A faulty Fuel Pump, pressure regulator and or fuel injectors.
13. Vacuum line from intake manifold to petcock broken, cracked, or not attached, carburetor vent line plugged.
14. Needle and seat stuck closed in the float bowl.
For more information about your issue, please visit the websites below. Good luck and have nice a day.
https://www.tradebit.com/filesharing.php/search/0/2008+gilera+runner+st+125

Aug 15, 2015 | 2008 Gilera Runner ST 125

1 Answer

Hi, i recentky bought a gilera runner recovered from stolen there is a screw in the key slot how do i remove the key barrel and do i need a whole new barrwl or just the key barrel?


The best solution is to purchase a new ignition and key. You can find them at very cheap prices on ebay.com and many other parts websites. Good luck!

Sep 15, 2013 | 2010 Gilera Runner SP 50

1 Answer

MY BIKE WAS STOLEN AND I RECIVED IT BAC WITH ONLY


if its a vx gilera u will need ur brown master key to start the bike up again,,if its a sp there should be a green and red circular part with a plug on it u need to connect this to the wiring loom also check that the petrol cable has not been cut where the carb is,this is common pratice for police when they find stolen bikes,to stop it being stolen again,if they dont recover it str8 away,

Jan 21, 2010 | 2006 Gilera Runner VX 125

1 Answer

Program new key


do u meen the code key you can swap chips over just put a needle through the tiny hole in the swing out chip holder u will no wot i meen my frend gd luck

Nov 29, 2009 | 2005 Gilera Runner VX 125

1 Answer

Gilera runner stolen, changed barrel/immobiliser, no spark


You definitely need to change all with a kit of : ECU, engine main switch, seat lock and you will get in the kit 3 new keys, 2 black and 1 red.The black ones need to be programmed from the red one at a dealer's workshop.Then store the red some place safe.

May 27, 2009 | 2005 Gilera Nexus 500

1 Answer

Ignition, when you take barrel out, and the wiring part on back


Go to the site below and you can download a free service manual for your bike. Now you can do more than ever before. For the ignition switch, Google " motorcycle salvage gilera ". You can probably get an entire switch there for cheap.

http://www.carlsalter.com/motorcycle-manuals.asp

Please rate this answer. Thanks!

Mar 22, 2009 | 2005 Gilera Runner VX 125

3 Answers

Gilera runner stolen, changed barrel/immobiliser, no spark


There's a procedure to recode new keys, so the immobilizer let's you use the new key, if (and only if) you have the master key (red). Look at this PDF:
http://www.wotmeworry.org.uk/manuals/Gilera%20Nexus/Gilera%20Nexus%20500%20Mk1%20Workshop%20Manual.pdf

Look for "Setting the Circuit" in the PDF.
Good luck!

Mar 12, 2009 | 2005 Gilera Nexus 500

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

376 people viewed this question

Ask a Question

Usually answered in minutes!

Top Gilera Experts

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4477 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

Are you a Gilera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...