HELD THE RESET AND SELECT BUTTONS WENT INTO DIAG MODE ,THEN CO THEN C1 -2 C2 0 C3 6 C4 2 DONT KNOW IF I CHANGED ANY SETTINGS AND IF THESE CODES ARE WRIGHT OR WHAT THEY ARE FOR THAT MATTER CAN SOMEONE PLEASE EXPLAIN.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hold down the SELECT & RESET buttons on instrument, then turn on key. Keep them down 8 seconds & you should see DIAG come up let the buttons up for a second , Then down again 2 more seconds then up. Should see D01 ??. you are in diag. mode. Twist the throttle & D01 is the Throttle position sensor reading from 15 up to about 100. You can up OR down through the D codes with the SELECT & RESET buttons. D62 is the history of any codes, should be 0,If codes they would be in D60 OR D61. You can go back to D62 (history) & clear them by turning off & on the RH handlebar KILL switch. To Get out of DIAG. Mode, Turn Off Key & back on.
that seems to be a common problem. its a valve in the exhaust thats supposed to make the exhaust flow a little more efficient. everybody i know that has had that problem just disconnected the cables to the valve and the light went off. they haven't had anymore problems since.