Question about 1975 kawasaki Z1B

1 Answer

Clutch rattle kawasaki gt750 p5 is overhaul kit available for clutch basket ? ie cush rubbers and rivets to split clutch basket renew rubbers and re rivet assembly also exploded view of shaft drive transfwer box on engine and final drive unit thanks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 83 Answers

No there is not a kit available. I have tried it myself before and used other spec material for the damper in the clutch and made the rivets myself. Worked great but is very timely. I'd actually recommend buying a new basket. The side pedals on the original basket often get grooves from the clutch plates wearing on them which can cause clutch chatter too.

Posted on Dec 07, 2008

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Change indicator relay kawasaki gt750

Hi, Michael for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Kawasaki, despair not, for a mere $35 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Replacing Flasher Relay
Kawasaki Ninja 650R 2012 2016 LED Flasher Relay DIY Installation by TST...
OEM Parts for Kawasaki
KAWASAKI Workshop Manual GT750 Z750 Shaft 1982 1983 1984 1985 Service...

Aug 21, 2016 | kawasaki Motorcycles

1 Answer


any that match the size of the originals,anymore will be spam and deleted

Jul 09, 2015 | kawasaki Motorcycles

1 Answer

Can the carbs on a kawasaki gpx 750 1988 model go on a kawasaki gt750 model 12/84 model?

the gt750 carbs are spaced further apart cos its air cooled the linkages that connect the carbs together is the problem.

Nov 19, 2013 | kawasaki GT 750 Motorcycles

1 Answer

Need to remove gearbox what tool do I need to remove the 30mm nut inside the clutch basket. Can it be done without that tool

an air powered rattle gun usually gets them off, hold the centre with a rag and watch your fingers

Jun 09, 2011 | 1999 kawasaki ZX-9R Ninja

2 Answers

When I let the clutch out it makes some noise. It that the gear box going out ?

it can be a worn clutch basket, do you hear a rattle when engine is idling, and goes away when you pull clutch in? if so suspect worn clutch basket / bushes

Jun 04, 2010 | 1995 kawasaki VN 750 Vulcan

2 Answers

My zzr 1100 makes a noise on the cluch side of the motor until it reaches operating temp. whats the problem?

could be valve noise valves should be check at regular intervals a chance it may be a wearing cam chain

Jan 28, 2010 | 1996 kawasaki ZZR 1100

1 Answer

Can parts of any year of a kawasaki gt750 fit a

yes, technolgy has changed alot sine 1983

Jul 14, 2009 | 1992 kawasaki GT 750

2 Answers

A rattling noise coming from the engine.

Clutch baskets are a common problem in those bikes.

Jun 15, 2009 | 2001 Yamaha YZ 426 F

1 Answer

Something is rattling in tranny or engine?

Its worth openning again the side cover and re-inspect that nut, not bad too if you can remove the clutch basket taking care of the plates as how they are fitted so that you don't get confused on assembling.
Check for the wear on the basket where the clutch plates go in and are thn driven especially those notches, check too the gear that mashes with the clutch system for any wear and not bad to check the springs too in the clutch basket.

Hope this helps .

May 11, 2009 | 1996 kawasaki VN 800 Vulcan Classic

1 Answer

Clutch rattle and notchy gearchange

dear sir the springs in your clutch is what puts pressure on clutch discs. these springs should all be the same length they should be measured with a caliper and compared to specs . the notchy feeling on your clutch is caused by wear spots on your clutch basket. if you are careful they can be filed down just keep them straight this will restore a smooth clutch feel. to check progress slip a clutch disk in the basket all outer dogs of the clutch plate must contact basket at the same time good luck jim

Mar 15, 2009 | 1999 Yamaha TRX 850

Not finding what you are looking for?
1975 kawasaki Z1B Logo

426 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4481 Answers

Angelo Stewart
Angelo Stewart

Level 2 Expert

224 Answers


Level 3 Expert

61249 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides