Question about 2007 Suzuki DL 1000 V-Strom T
Hi! I presume you are in a fairly warm climate? if so 10W40 synthetic should do the trick as for quantity? Not seeing many of these in my area I can only presume Suzuki still have a SIGHT/LEVEL glass usually just below or aroung the base of oil filler. Wth the bike upright on centre stand the oil should be visible through of the Round sight glass (1/2 way up). So dump your old oil, replace oil filter and remember to put sump plug back? fill with required oil to half way up the sight glass and Bingo!
Hope this helped,
Posted on Dec 03, 2008
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Rocker Studs (screw-in) Engine Oil 50 ft-lbs. Oil Pump Engine Oil 65 ft-lbs. Oil Pan Engine Oil 12 ft-lbs. Cam Sprocket (upper gear) Thread Locker 20 ft-lbs. Timing Cover Engine Oil 6 ft-lbs.
(Cast Iron Heads)
Non- Hardening Sealer 30 ft-lbs. Valve Cover Engine Oil 3 ft-lbs. Exhaust Manifold Anti-Seize Lubricant 25 ft-lbs. Spark Plugs No Lube or Sealer 20 ft-lbs.
Thread Locker 60 ft-lbs. Clutch Pressure Plate Thread Locker 35 ft-lbs.
Engine Oil 60 ft-lbs.
(Transmission to Block)
Engine Oil 25 ft-lbs.
Dec 02, 2016 | Cars & Trucks
on Jul 17, 2010 | 1985 Chevrolet Chevy
May 04, 2015 | 1998 Chevrolet Chevrolet silverado
Mar 14, 2015 | Volkswagen Polo Cars & Trucks
Dec 22, 2014 | 2001 Cadillac Catera
May 14, 2011 | Ford Focus Cars & Trucks
Engine Oil Recommendations
Use 4-stroke oil, or equivalent high detergent, premium
quality motor oil certified to meet or exceed U.S. automobile
manufacturer's requirements for API Performance
Class SF or better. SAE 15W-40 is recommended for general,
Engine oil is a major factor affecting engine performance
and service life. Non-detergent and 2-stroke engine oils will
damage engine and are not recommended.
• Be sure to use engine oils specified under "Engine Oil
It is very important to maintain proper level of engine oil to
keep engine in good running condition.
• Check engine oil level prior to each use. Refill engine
oil if oil level is low.
FIGURE 17: Recommended Oil Viscosity
Crankcase pressure can cause hot engine oil to
spray out of engine fill hole. Hot engine oil can
cause severe burns.
• ALWAYS stop engine before removing the oil fill cap.
FIGURE 18: Oil Fill Cap Removal
FIGURE 19: Oil Fill Measurement
Oil Capacity [qt / ml]
HW1000i 0.26 / 250
HW2000i 0.48 / 450
TABLE 4. Engine Oil Capacity
Mar 08, 2011 | Garden
Aug 11, 2010 | 1989 Ford Ranger
Feb 24, 2010 | 2006 Hyundai Tucson
Jan 25, 2010 | 2006 Jeep Grand Cherokee
210 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: