For the Sette Triton 12 Function Cycle Computer:
Go to the ODO mode, then press and hold the tiny "SET" button on the back of the computer for 3 seconds to go to setting.
Press "SET" button again to select between Km/H or Mile/H. Press large "MODE" button to go to Bike1 & Bike2 Setting. Then press "SET" button to select Bike1 or Bike2.
Press "MODE" button to go to Wheel Settings. Input the correct wheel size by pressing "SET" Key. the size it asks for is the circumference of the tire, in millimeters. You can find the circumference yourself by making a mark on your tire, pushing the bike forward until the mark makes one full rotation, then measuring the distance on the ground between where the tire started and stopped.
A table like this:
http://1.bp.blogspot.com/_bTatB4zy3aI/Sh8Yx7IsnwI/AAAAAAAAABs/KHvHuoYuARA/s1600-h/circs.JPG
is included in the manual, and if you know what size tire you're using, I'm almost positive the number under "circumference" is the correct one to input into the cyclo-computer.
×