Question about 1996 Honda CBR 600 F(3)T

1 Answer

Won't Start! Ran fine before,Went to start one day backfired and that was it.still turns over good but nothing.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi and welcome to FixYa,

Initially, a couple of ideas that could be explored:

  • check/clean/replace the sparkplugs;
  • verify presence of spark on plugs when cranking;
  • drain all carbs, verify no water, sand, rust in the the bowl;
  • verify sufficient fuel is delivered to all carbs;
  • verify all vacuum hoses attached to appropriate ports;
  • worst case scenario, carb cleaning/rebuilt maybe required.
Just a start, do postback how things turned up or should you need additional information. Good luck and Thank you for using FixYa.

Posted on Nov 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

96 GMC Yukon won't turn over


Thats what i would try and if that dont help, maybe check the connections at the starter.

Feb 18, 2013 | 1996 GMC Yukon

1 Answer

2004 susuki forenza won't start after i put new head and put in time ,ran good for thirty minutes


Old post but , this answer covers all , of this type symptoms.
new head,
ran for 30 minutes
so does it crank ? ok? if not dont crank, it can start.
so crank is next. (first)
backfiring (true to the air cleaner) usually means TIMING IS way off and sure engines can start with timing way off and then stall and flood out.
nothing new there.
you did not time the engine correctly.

get the FSM on engine. read the pages.
or go to alldata.com and read that.
for others searching using google, my lil. contribution;

Jan 27, 2013 | 2004 Suzuki Forenza

1 Answer

89 K5 Blazer 350 TBI cranks but won't start... the rad hose blew, i fixed it then the next day it bogged and backfired, ran fine cold, but when warmed up it would lose power and stall when trying


Have you checked Google I found this hopefully it's not your timing or it may be flooded but doubtful have you tried spraying starting fluid into the intake while cranking it

Jun 01, 2012 | Cars & Trucks

1 Answer

96 altima won't start


Check to see if distributor is loose. If it is, look for indications of where it was clamped before it moved to get it back close so you can start it and set timing.

Is the fuel pump energizing? If not, look for the white wire and see where it goes. If it just goes to the frame, re-do the ground wire to a new clean location.

if it is energizing replace the fuel filter.

if still not running, check for spark. If you have spark, check emissions hoses and see if EGR is closed. If it is stuck open, it will lean the engine out.

If it starts and runs without power, drop the exhaust, the catalytic converter and or muffler may be obstructions since it backfired. It should start even with those damaged, but it may not be able to move enough air through to run well.

Jan 28, 2012 | 1996 Nissan Altima

1 Answer

'04 Kymco Venox won't start. Bought it a few months ago from someone w. about 20,000 miles on it. Always runs good/never had a problem w. it 'til yesterday. Ran outta gas on the road...put more...


Hi Mrcherry99, for this situation I would call my local dealer or reputable shop's service department and inquire about any possible quick fix. If necessary transport your vehicle to the dealer or shop and have a professional technician take it for a test drive, if possible, and give you a written estimate of repairs and answer any specific questions you may have about your issue. Good luck and have a nice day.

May 18, 2011 | 2005 Kymco Venox 250

3 Answers

Car won't start not the battery


Test the neutral safety switch but doing the following steps.

1)foot on brake
2)turn key to on position
3)shift lever to neutral (N)
4)start the engine
5)shift the lever to Park (P)

If the engine can start at N and not at park then it's the neutral safety switch.


Dec 01, 2009 | 1999 Ford Taurus

1 Answer

Mower ran fine a couple days ago. Went to start


Remove the plug, pull the rope several times. Wait about 30 minutes. Put the plug back in. Try again.

Choke off? Use sparingly if at all. If you have a primer button, only press it 5 or 6 times.

Is your plug in good contition? It may need a replacement. Make sure you get the correct plug.

Let me know how this works out.

a

Sep 21, 2009 | Garden

1 Answer

Bike backfireing


check needle and seat also air filter

hope this helps

May 02, 2009 | 1994 Suzuki GSX-R 750 WR

Not finding what you are looking for?
1996 Honda CBR 600 F(3)T Logo

Related Topics:

258 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...