The blinker and odometer on my 1998 harley fat boy with not work when I turn it to ignition but will on the accessories setting. Is it a fuse do you think? I just replaced the battery. Where is the fuse block for it?

Duplicate question already answered

There does not appear to be a 61006 DTC.
There is a DTC B1006 which is Accessory Line Overvoltage

There

Ignition and accessory voltage is constantly monitored by the
speedometer (terminal 1 ignition and terminal 6 accessory). If

the battery voltage fails to meet normal operating parameters,
a DTC is set.
DTC B1006 is set or displayed when accessory line voltage is greater than 16.0 volts for longer than 5 seconds.

More than likely it will be the speed sensor mounted on transmission case.

Hi, Rhargett3 and the usual suspects are:
1. Contaminated or faulty speed sensor.
2. Faulty turn signal module.
3. Corroded, broken or loose connector pins/sockets in the wire harness between the speedometer and the ECM or TSSM and the sensor.
4. The speedometer unit has failed.
5. Speedometer instrument fuse has blown.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at [email protected]. Good luck and have a wonderful day.
https://www.v-twinforum.com/threads/speedometer-not-working-on-01-fatboy.193702/#post-1995521
http://www.mediafire.com/file/65o6mbkdq5ty8ke/99_to_05_Harley_Softail_Service_Manual.pdf/file
https://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc
https://serviceinfo.harley-davidson.com/sip/service/document/6300
https://www.6ya.com/ to speak to me personally

ckeck your fuse block

You've blown a fuse, check the fuse block. it should be an accessory fuse.