Question about 2003 Suzuki GSX-R 600

2 Answers

Electrical fault i have a gsxr 600, 03 both of the indicators on the same side have stop working and the high beam lamp witch is also on the same side. I've already changed the indicators for new ones and changed the high beam bulb. have you heard of this happening before? if so do you have any answers to this problem? thank you for your help, phoenix

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

You have a small connector that opperates all you electrical sensors and lights, it will be black and right behind the front fender area.

Posted on Jun 03, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi and welcome to FixYa,

Initially, since the occurrence is all on one side, then there is a strong possibility that they are interrelated and the common factor is the ground line of the left side. Pls check the ground wire. It would also be to youor advantage to check the regular components such as the fuse, switch, connectors.

Just a start, do postback how things turned up or should you need additional information. Good luck and Thank you for using FixYa.

Posted on Nov 26, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi,I have an Alfa 2001 156 cigarette lighter not working found some fuses near the battery but not one for the cigarette lighter


Fuse box in passenger compartment Alfa Romeo 156.
fuse box location.
The fuses for the main devices are housed in a control unit under the dashboard, to the left of the steering column. To gain access to them, remove the panel (A) releasing the tabs (B) in the direction of the arrow below and remove the screw (C).

fuse box layout.

1 Ignition auxiliary circuits relay 1 2 Heated rear window relay 3 Horn relay F1 (10A) RH headlamp- high beam F2 (10A) Headlamp high beam warning lamp, LH headlamp-high beam F3 (20A) Boot lid/tailgate lamp, central locking F4 (10A) Headlamp adjustment, RH headlamp-low beam F5 (30A) Electric windows(front) F6 (10A) LH stop lamp, LH tail lamp, RH licence plate lamp, RH rear fog lamp, RH side lamp F7 (10A) LH licence plate lamp, LH rear fog lamp, LH side lamp, RH stop lamp, RH tail lamp F8 (10A) LH head lamp-low beam F9 (15A) Cigarette lighter, heater/air conditioning (AC) F10 (20A) Wind screen wash/wipe system F11 (20A) Horn F12 (10A) Alarm system, anti-lock brake system (ABS)(with ESP), audio system, instrument panel, interior lamps F13 (10A) Anti-lock brake system (ABS), central locking, electric door mirrors, electric windows, glove box lamp, reversing lamps, stop lamp (high level) F14 (10A) Hazard warning lamps F15 (30A) Door mirror heater, heated rear window

Sep 13, 2017 | Alfa Romeo Cars & Trucks

1 Answer

Driver side low and high beam on but dim. Passenger side low beam normal but high beam on and dim


I would check for the groundwire continuity

Driver side - dim low beams and no hi beam - Subaru Outback ...

www.subaruoutback.org > ... > General > Electrical & Electronics
Oct 11, 2014 - Hi everyone, My drivers side headlights are dim on low, (car has separate bulbs ... When the headlight switch is turned ON, but for low beams, ...

Driver-side Low beam Not Working (electrical issue not bulb ...

www.hummer4x4offroad.com/.../showthread.php?...Driver-side-Low-be...

Mar 12, 2015 - 10 posts - ‎4 authors
The high beam continues to work on both sides...I pulled the Driverside headlamp fuse and then both left and right beams lit up but very dim.

High beams ok, but not low beam - one side only - TDIClub Forums

forums.tdiclub.com > ... > VW MKIV-A4 TDIs (VE and PD)
Jan 23, 2014 - My driver's side lights are working fine - high and low beams. ... But it definitely looks like the big lamp on the driver's side gets brighter when ..... Drivers side headlight is very dim on low beam and goes out when on high beam ...

Dim driver's side headlight (low & high beam) - GrandAmGT.com Forum

www.grandamgt.com > ... > Technical Q&A

Dec 11, 2002 - 6 posts - ‎4 authors

Jan 04, 2016 | Cars & Trucks

1 Answer

Had loose battery terminal, fixed it but now the high beams don't work


there is a relay for high beams try that it should be under the hood if you have fuse box under hood good luck

Dec 11, 2013 | Cars & Trucks

1 Answer

My 2002 impala headlights don't work at night or in dark places like a tunnel or under a bridge, they only work in the day time. I have day time runner lights and they automatically turn on when I start my...


You can't turn them on manually with the switch . You have the switch set on auto ?
Headlamps
You can use the headlamps in two different ways.
• Place the headlamp switch in the ON position for normal operation.
• Place the headlamp switch in the OFF position for automatic lamp control (ALC). During ALC the high beam headlamps are On at reduced intensity for daytime running lamp (DRL) operation in daylight conditions, or low beam headlamps On in low light conditions.
The DRL/EXT LTS fuse and the EXT lamps fuse in the underhood junction block supply battery positive voltage at all times to both of low beam lamps and to the right high beam lamp. The low beam circuit continues to the high/low beam switch, then, depending on the position of the dimmer switch, connects to the normally-open headlamp relay switch contacts. Placing the headlamp switch in the HEAD position provides a ground path for the headlamp switch input of the Body Control Module (BCM). After receiving this input, the BCM energizes the headlamp relay. When the headlamp relay is energized, the low beam circuit is connected to ground G201. The high beam circuit is divided into a left and a right side circuit.
The DRL/EXT LTS fuse in the underhood ignition block supplies battery positive voltage to both the coil and to the normally-closed contact of the DRL relay switch circuit. During high beam operation, the left side current flow is through the closed contacts of the DRL relay, and to the left high beam lamp.
The EXT Lamps fuse in the top of the engine fuse block supplies battery positive voltage to the right high beam lamp. Both high beam circuits are then connected together, and continue to the dimmer switch. When the driver closes the high beam contacts of the dimmer switch, the circuit is grounded at G201.
Both the headlight switch and the BCM provide a ground, or control circuit, to the headlight relay coil circuit for manual or automatic headlamp operation. When you place the headlamp switch in the OFF position, and the ambient light sensor indicates low light conditions, the BCM energizes the headlamp relay for low beam operation. You may switch the headlights to high beam by pulling the dimmer switch handle toward you until the dimmer switch is activated. When the dimmer switch is placed in the HIGH position, the indicator lamp input to the BCM is pulled low. The BCM then sends a class 2 message to the instrument cluster in order to illuminate the high beam indicator lamp.
If the headlamp switch is left in the head position, the inadvertent power control feature will turn off the headlights 10 minutes after you turn the ignition switch to the OFF position. If you place the headlamp switch in the head position after the ignition switch has been turned OFF, or if the ignition switch is in the ACCY position, the headlights will remain ON until you turn them OFF or until the battery runs dead.

Dec 07, 2017 | Chevrolet Impala Cars & Trucks

1 Answer

2004 hyundai sonata headlamps dont work check all fuses


I'm not surprized to hear that you have not found any bad fuses. That is a good thing...because fuses do not CAUSE electrical system failures anyway. Electrical system failures cause fuses to blow. If you are going to figure anything out when it comes to automotive electrical system failures, it is very important to understand the proper cause and effect. Otherwise you will only spin your wheels and go nowhere. If there is a blown fuse, it will not do much good to replace it unless you diagnose and repair the reason that it blew in the first place. (Fuses do not just go around blowing for no reason, just to make your day miserable.)

OK, 'nuff Preachin'.......

The first thing that I recommend that you do, is to gather (and post) more information about the problem. Are the headlamps not working at all? Are both the HIGH BEAM and the LOW BEAM lamps not working? Both sides of the vehicle? or is one side working? Is the vehicle equipped with daytime running lamps? (this makes a HUGE difference in the list of possible causes.) What about the tail lamps and fog lamps? Are they all working? Also, does the HIGH BEAM INDICATOR on the dash work?

The answers to all of these questions can be clues to where in the headlamp system the fault could be located.

May 23, 2012 | Hyundai Motor 2004 Sonata

1 Answer

1998 exporer Limited Edition Day time running lights don't work. I am trying to locate the DTRL Module on the vehicle. I will start by replaceing that first.Also have problem with my high beam indicator...


There is a fuse that controls; headlamps, DRL module & instrument cluster. It is the fuse box inside the vehicle mounted on the side of the dash on the drivers side and you can see the panel if you open the door. the fuse that I am talking about is in the # 33 position. If you are looking into the box the one on the very bottom closest to the firewall. There are onlt two fuses on the bottom and they are both sideways. It's a 15 Amp fuse. Ihope this helped you and good luck.

Feb 10, 2011 | 1998 Ford Explorer

1 Answer

2007 gsxr headlight went out...all other lights work,


Low beam switch may be bad. use a meter to check for power to lowbeam side of lamp. cleaning with electrical contact spray may help.

May 05, 2010 | 2007 Suzuki GSX-R 600

1 Answer

Low beams suddenly stopped working -1988 Volvo 760 GLE


I doubt that the obc is the source of the problem.
More than likely, it's the relays.
They're not easy to remove, until you remove the ashtray housing, which is 4 fixings in total, if I recall correctly.
Good luck.

Jul 13, 2009 | 1997 Volvo 960

Not finding what you are looking for?
2003 Suzuki GSX-R 600 Logo

237 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

78257 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4727 Answers

Richard
Richard

Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...