- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
sounds like your shift lever may have been put back on in a different spot on the shift shaft. make sure it can move up and down with out hitting anything.
Try rolling the bike back and forth while trying to take it out of gear if this doesn't work ur clutch has brine burned out and ha s locked ur gears up but this one would be the last thing to check once u have tryed rolling it.
Hi Alex Iam not too sure but I think this model had a neutral switch fitted that stopped the bike from starting in gear , and displayed a light on the clocks when the bike was in neutral .
If as you say the bike is jammed in first this is probably the cause
the jamming sounds abit more serious ?.. you may have bent the selectors and this will mean a gearnox stripdown , it is even possible you have damaged the lay shaft if the bike was travelling when you came off this would also mean a box strip down .
I dont think there is an easy answer to this one Alex loks like you will have to take the engine apart to fix this one ( one thing did strike me I had an old BSA that I slid on the gear shaft and did the same thing stuck in first turned out I had bent the gear shaft removal of the pedal and gentle tapping freed the gears off and I was able to use the bike again ? it may help I cant be sure be careful not to damage the case or the splines I used a small lump hammer and a block of 4x 4 against the shaft .. I also put a wedge behind the shaft to stop damaging the rear of the box housing ) hope this helps Regards vortash
make sure your foot is not holding the gear selecter after changing into second while riding as this would not let the bike go any higher through the gears
×