Question about 2006 Harley Davidson FXDBI Street Bob

1 Answer

Wheel fitment options.

Help. Are harley wheels interchangable? I want either fatboy wheels front and rear ( early 16" ones) or a 21" on the front on my street bob (2006). I think all the wheels i've seen look like they have the same width hub as mine, and the difference in fork width is taken up by different spacers for different models. Meaning any late wheel will fit, subject to clearence, tyre size etc. Am i right or seriously mis-guided?

Ride safe...... Steve.

Posted by on

  • Anonymous Mar 23, 2014

    Front wheel speedometer cable; four speed kicker; 96 CI stroker; 16" rear wheel; 21" front wheel; speedometer reads approximately 10 MPH over the actual traveling speed; does the front wheel size affect the speedometer reading; does the rear wheel size affect the speedometer reading, or the rear sprocket size affect the speedometer reading?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 193 Answers

These wheels are interchangable. a number of bikers prefer the set up you have mentioned.
Bill

Posted on Nov 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What are the torque specs for front and rear rotor 2007 harley davidson fatboy


Hi Anonymous, front 16 to 24 ft lbs. rear 30 to 45 ft lbs. with blue loctite. Good luck.

Jun 06, 2015 | Harley Davidson Motorcycles

1 Answer

Front tire size?


With a tube type laced wheel:

WHEEL SIZE & POSITION = 21 in. - Front RIM SIZE & CONTOUR = T21x 2.15 TLA TUBE SIZE =Side Valve Tube MH90x21 TIRE SIZE = DUNLOP D402 MH90 - 21 54H

With a CHROME ALUMINUM PROFILE LACED RIM:

WHEEL SIZE & POSITION = 21 in. - Front RIM SIZE & CONTOUR = T21x 2.15 MT TUBE SIZE = Center Valve Tube MH90x21 TIRE SIZE = DUNLOP D402 MH90 - 21 54H

With a Tubeless Cast Wheel:

WHEEL SIZE & POSITION = 16 in. - Front RIM SIZE & CONTOUR = T16 x 3.00 D Rim Valve hole diameter = .035 inches MH90x21 TIRE SIZE = DUNLOP D402 MT90B16 72H

Jul 11, 2014 | 2006 Harley Davidson FXSTDI Softail Deuce

1 Answer

What are the wheel and tire sizes front and rear for my 99 1200 sportster?


Fitment for 1999 XL Tubeless Cast Wheels:


Wheel Position and size = 19 inch Front; Rim Size and Contour = T19x 2.15 MT; Rim Valve Hole Diameter = 0.45 inch; Tire Size = Dunlop D401 ELITE S/T 100/90-19



Wheel Position and size = 16 inch Rear; Rim Size and Contour = T16 x 3.00 D; Rim Valve Hole Diameter = 0.35 inch Tire Size = Dunlop D401 ELITE S/T 130/90-16


Wheel Position and size = 19 Inch Front; Rim Size and Contour = T19x2.50 TLA; Rim Valve Hole Diameter = 0.45 inch Tire Size = Dunlop K591 S&FR Elite SP 100/90-V19


Wheel Position and size = 16 Inch Rear; Rim Size and Contour = T16x3.00 D; Rim Valve Hole Diameter = 0.45 inch Tire Size = Dunlop K591 S&FR Elite SP 130/90-V16


Tire Fitment for 1999 XL Tube Laced Wheels:


Wheel Position and size = 19 Inch Front; Rim Size and Contour = T19x2.50 TLA; Tube Size = MJ90-19 Tire Size = Dunlop D401 ELITE S/T 100/90-19


Wheel Position and size = 16 Inch Rear; Rim Size and Contour = T16 x 3.00 D ; Tube Size = MT90-16; Tire Size = Dunlop D401 ELITE S/T 130/90-16


Wheel Position and size = 21 Inch Front; Rim Size and Contour = T21x215 TLA; Tube Size = 3.00 x 21; Tire Size = Dunlop Touring ELITE II MH90 - 21 56H


Wheel Position and size = 16 inch Rear; Rim Size and Contour = T16x 3.00 D; Tube Size = MT90-16; Tire Size = Dunlop Touring ELITE II MT90 - B16


Tire Pressure - All Models:


Cold up to 300 Lb. Load (includes rider, passenger and cargo)


Front = 30 psi (2.1 bar)

Rear = 36 psi (2.5 bar)


Up to GVWR maximum load


Front = 30 psi (2.1 bar)

Rear = 40 psi (2.8 bar)

Jul 07, 2014 | 1993 Harley Davidson XLH Sportster 883

1 Answer

Years fit


Doesn't the Fatboy from wheel have only ONE disc?

So once you bolt the rear disc on, where are you going to bolt the belt drive pulley on the other side?

May 13, 2014 | 1993 Harley Davidson FLSTF Fat boy

1 Answer

My 2006 Fatboy front end vibrates above 60mph


Hi Anonymous, and the usual suspects are:
1. Improperly loaded motorcycle. Non standard equipment on the front end such asheavy radio receivers, extra lightning equipment or luggage tends to cause unstable handling.
2. Incorrect air suspension pressure.
3. Damaged tire(s) or improper front-rear tire combination
4. Irregular or peaked front tire tread wear.
5. Incorrect tire pressure.
6. Shock absorber not functioning normally.
7. Loose wheel axle nuts.
8. Excessive wheel hub bearing play.
9. Improper vehicle alignment.
10.Steering head bearings improperly adjusted.
11. Tire and wheel unbalanced.
12. Rims and tires out of round or eccentric with hub.
13. Rims and tires out-of-true sideways.
14. Shock absorber improperly adjusted.
15. Worn engine stabilizer links.
16. Damaged rear engine isolation mounts.
17. Swing arm pivot shaft nut improperly tightened or assembled.
Good luck and have nice day

Dec 28, 2012 | 2006 Harley Davidson FLSTF Fat Boy

1 Answer

Will fatboy rear wheel fit a sportster


Hi Anonymous, 4 out of 5 Harley Gods give this one a thumbs up, but just to be on the safe side contact your local dealers parts department for confirmation. Good luck

Nov 16, 2012 | Harley Davidson FXDBI Street Bob...

2 Answers

Can a 2000 fatboy front fender fit on a 2003 fatboy?


86 to present according to my local dealer,, the changes were to the rear fender only as it widened

May 03, 2011 | 2003 Harley Davidson FLSTF Fat boy

1 Answer

What are the standard wheel sizes of a 2009 FXST


Harley did not make a FXST in 2009 so I am assuming you need the tire and rim sizes for the 2003. The tire sizes are front 80/90-19 or a MH90-21 depending on rim size and rear is 150/80B-16 71H. I hope this answered your question.

Oct 25, 2010 | 2003 Harley Davidson FXST Softail Standard

1 Answer

What are the wheel and tire sizes front and rear for my 99 883 sposter?


Tire sizes. Front 100/90-19
Rear 130/90-16

Wheel sizes front laced - 19 in.
rim width and contour - T19 X 2.5 TLA
Tube size - MJ90-19

Wheel size rear laced - 16 in.
rim width and contour - T16 X 3.00 D
Tube size - MJ90-16

Wheel diameter tubless rim front - 19 in
rim width and contour - T19 X 2.5 MT

Wheel diameter tubeless rim rear - 16 in.
rim width and contour - T16 X 3.00 D

May 26, 2010 | 1993 Harley Davidson XLH Sportster 883

1 Answer

Harley wheels


Don't think so. Sportster and Dyna wheels interchange, depending on the year. Check with dealer for the Sporty/Dyna wheels that will fit.

Mar 19, 2010 | 2001 Harley Davidson FXD Dyna Super Glide

Not finding what you are looking for?
2006 Harley Davidson FXDBI Street Bob Logo

533 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4477 Answers

Gills Lango

Level 2 Expert

195 Answers

Mike

Level 3 Expert

4331 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...