Question about 2004 Suzuki RM-Z 250

1 Answer

Gas tank How hard is it to change gas tanks? I want to put a tank on it without any emblems but I am not sure of what all I need to know in order to make sure the one I get fits right. If someone could help me I would appreciate it.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 2,336 Answers

If the emblems are decals, you can heat them with a hair dryer and peel them off with a credit card. If they're metal, I would think it's easier to take off the metal emblems and have the original tank repainted, or at least touched up.

Posted on Nov 20, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Removing emblems from gas tank?

Hi, Jack for more information about your question and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Removing Emblems from Tank Paint Twin Forum Harley Davidson Forums
Removing new harley emblems off the gas tank

Btw, I’m available to help over the phone in case u need at

May 01, 2016 | Motorcycles

1 Answer

Hard to start after putting gas in tank

Gas cap bad they should help equalize the pressure in the tank

Mar 19, 2013 | Emission System for Chevrolet Cruze

2 Answers

Do i actually have to drop the gas tank to change fuel pump?

Yes. You have to drop the gas tank to change the fuel pump. I would not do this at home! You need a hoist (car lift) and you have to drain the gas from the tank. Most shops would charge about $100-160 plus parts for this service..

Feb 22, 2011 | 1999 Chevrolet Malibu

1 Answer

Hard to fill with gas when try to put gas in tank it keeps shutting off the gas hose it acts like i am topping off the gas tank but the tank is far from full

Hi this is a common problem, the problem is to do with the breather hose from the tank getting blocked this is a common fault, but to replace the breater your going to need to get the tank lowered from the car so you can get to the breather hose on top of the tank.

if your doing this yourself then you will need to get a workshop manual to do this as this is quite a lot of work involved.

their is no easy fix its going to be a case of changing parts on the tank

let me know if you need further assistance ok

plz rate this post as i have a whole page of unrated posts, thanks

Aug 26, 2010 | 2000 Hyundai Accent

1 Answer

What's the simplest way to remove the gas tank logo's from my v-star 1100 custom?

Go to a auto paint supply store and buy the emblem remover spray costs about ten bucks and will scrape off with plastic squeegee you can buy one four a buck at the same place and if you don't know of any paint stores look in the yellow pages of the phone book under paint and look for auto paint retail store. You can also use a hair dryer and a single edge razor blade heat the emblem up with the hair dryer and carefully get blade under the emblem then pull on the tip and keep a steady slow pull on the emblem and use the blade to help lift it up. Then you can clean the glue off with gasoline or super Clean. Be sure you have the gas cap on and a wet rag around the tank lid to prevent a spark from hair dryer igniting the gas. If you need more assistance let me know please rate and thank you for using fixya.

Aug 18, 2009 | 2004 Yamaha V Star Custom

1 Answer

How do you get to the gas tank to check and see if sticking

Yes there is a float that is connected to the sending unit in the gas tank. In order to get to it, you have to remove the tank (drain it first) and it all comes out the top of the tank. You will probably want to buy a whole sending unit to put in there. I'm not sure about yours, but the fuel pump and the sending unit may be all one piece. It's not a fun job, so you don't want to do it twice. I would change the fuel pump while i had it out anyway. Good luck!

May 21, 2009 | 2003 Kia Sorento

2 Answers

Gas filler

try this .. seat the gas nozzle all the way in there the next time your getting gas pull on the handle till it clicks off then pull the nozzle out a little bit .. then try putting the gas in... if it kicks off again try pulling it out a little bit farther.. good luck ray

Jan 17, 2009 | 2001 Hyundai Sonata

3 Answers

Fuel pump

the fuel pump is in the tank on the have to drop the gas tank to get to the fuel pump in order to change it out.

Jan 08, 2009 | 2004 Chevrolet Cavalier

1 Answer

I put a new gas tank in but know gas wont flow thru it

make sure you reconnected the wires and ground wire. did you also change fuel filter? might be clogged.

Nov 27, 2008 | 1996 GMC Suburban

Not finding what you are looking for?
2004 Suzuki RM-Z 250 Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts


Level 3 Expert

81400 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

5057 Answers


Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides