Exhaust hey guys just bought my first bike. now im lookin for an exhuast or slip on that will give it some more bass. any ideas???

did the guy give you the starting method. if not you have flooded the plug and it will only start if you replace the plug or dry it out.
method. dont touch the throttle. pull decom lever and kick over 10 times.
release lever get topwith kick start. pull decom lever slightly to allow kick start to drop 1 notch. release lever and let kick start back up and kick hard.
repeat should start second go.

you do know this is mountain bike
they have no motor

CLICK HERE for all the downloads available for your PC - including firmware, drivers, recovery cds and more.

CLICK HERE for all the Manuals available.

Thanks for using FixYa - a VERY HELPFUL rating is appreciated for answering your FREE question.

it's not an F1 light it's an FI light for fuel injection. is it a full exhaust installed on the bike or just a slip on? may need a power commander to balance it all out.

This sounds like (passing) resonance -- a natural phenomenon. You might be able to eliminate it by just tightening some bolts in the exhaust system -- or, it may never go away, or it may stop of its own accord.

supertrapp sounds well nice not sure if they do them for your bike though. where are you in the world?

you are supposed to jet any bike when you put a high performance pipe on it. you can damage valves and rings even with a slip on. i am using a stage 1 dyno jet kit with a yoshi rs3 oval slip on.

this is not true I am riding the same bike with the hardcrome 2 into one side burners and love the sound and the performance

I had my 2007 s4rs with full Termi exhaust (new ecu filter header) on a dyno this weekend and it reported 121 rwhp. I was expecting something in the high 120s but definitely not as low as 121. This dyno test was a freebie put on by a local dealership so I didn't get a print out or to talk to the guy doing the testing. Other people had their bikes dyno tested as well and experiences similar results/feelings to mine. Any ideas? Does this number seem on par? BTW- after the dyno I noticed that there some black residue on the slip ons that I've never seen before. I do remember some black smoke coming out during the dyno for a second, but I saw this on about 10 of the other 25 bikes tested. Any thoughts or ideas are very much appreciated,Dyno's are not zero'd out across the board, each one is a bit different. It's a tool for measuring losses and gains, nothing more. Pretty obvious by what you said that the dyno might read a tad lower than others. Nothing to worry about whatsoever.,,,

yes it will, i bought a 1 gb card & it will give you about 2100 pics at 1m setting, about 1300 at 3m. cost $20. works great. curtis