Question about 2002 Harley Davidson FXD Dyna Super Glide

1 Answer

Oil pro Bought my first ride in 20+ years a 1970 FL and it needs a clutch. Looked for parts in the J&P book but cant figure out if I need a wet or dry clutch! The oil hole in the primary is blocked off and I put some oil in the case to keep the primary chain lubed but I dont know how much or how often to oil it either. Can anybody help?

Posted by on

  • Anonymous Mar 15, 2014

    84 flht has a semi wet primary so if I put wet clutchs in and add oil do I just hook the oil supple and return line up or can I just plug them off



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

Rivera pro-clutch is the best clutch to buy. The initial cost hurts a little but you'll be very happy with the results. As far as oil or dry. I had oil and wished I had belt, only because the primary wasn't made to hold oil, so It leaked. No matter how much I tried it still leaked. If you go with oil you only need the oil to touch the teeth on the bottom of the basket. The oil will sling around more then you can imagine.

Posted on Nov 20, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Does it have a wet or dry clutch?

Hi, Andrea it has a wet clutch sorry you can't find the first and best tool you ever bought for your Kawasaki despair, not for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please visit the websites below. Good luck and have a nice day. Clutch Plates 07 Kawasaki Nomad

Mar 06, 2016 | 2004 kawasaki VN 1500 Vulcan Classic

1 Answer

What engine oil do you use

If you bike is still in warranty I suggest you use the manufacturer recommendation oil if not in warranty the choice is yours

The important thing to remember is that if you bike has a wet clutch you need to use bike specific oil if it is a dry clutch you can use a car engine oil off the same grade
I use castrol magna tec as I ride a 99 1100gs oilhead

Oct 08, 2015 | Motorcycles

1 Answer

Is a xr125L wet clutch or dry clutch

Hi, Anonymous "WET" for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere $10 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Clutch Engine Oil Question
Honda XR125LK Owner Manual

Feb 18, 2014 | Honda XR 125 L Motorcycles

1 Answer

What is the difference between wet clutches and dry

Wet clutches ride in oil ... dry do not.

Jun 17, 2013 | Motorcycles

1 Answer

Cant figure out how to use the bissell pro heat carpet cleaner


Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.

Bissell Proheat Upright Wet/Dry Vacuum Problems


Jul 25, 2010 | Bissell 7920 ProHeat Pro-Tech Upright...

2 Answers

I have a harley davidson XL883H and need to know what the fron fork oil level should be when the forks are fully extended?

Remove the small plugs at the bottom of each fork slider and drain the forks. Do this by working the forks up and down until the forks are empty. Then, refill the forks with the proper amount of oil. Since you are not disassembling the forks and cleaning them out, you should use the "wet" measure of oil instead of the "dry" measurement.

Since you didn't tell me exactly what year model 883 you have, if the fork tubes are 39mm tubes (measure the top tube) use the following amount of oil. I use 30 wt. fork oil. If this is too stiff, drop down to 20 weight.

883 Hugger --- 10.7 ounces
all others --- 9.0 ounces

That's the only ones I have information for at this time.

Apr 12, 2010 | 2006 Harley Davidson XL 883 Sportster

2 Answers

Just changed my gear box oil on my aprilia rs 125 2000 model and my clutch is sleeping how do i fix this and how much will it cocst thanks josh

i sure hope you didn't use car oil but bought motorcycle oil. The clutch is a wet-type system that uses engine oil to keep it cool. Motorcycle oil is formulated differently than car oil, which has detergents in it to add lubrication and engine life that will cause a motorcycle's clutch to slip. A new clutch is both inexpensive and easy to replace. When you buy a new clutch, don't forget the clutch cover gasket. i recommend EBC clutches.
1. Set up a little pan with MOTORCYCLE oil in it and place the new clutch discs and pressure plates in it so that they get well-covered with clean oil.
2. Drain the oil, remove the clutch cover and remove the bolts on the cover of the clutch basket.
3. Remove the old clutch parts and make sure you pay attention to what the last part is (disc or pressure plate).
4. Install the new clutch, starting with the last part you removed and alternate between the discs and pressure plates until you run out.
5. Reinstall the clutch basket's cover plate and re-torque the bolts to the specified setting, using a cross-sequence like you would on a wheel.
6. Clean all the old gasket off, install the clutch cove and new gasket and fill up your engine with oil.
7. Ride away happy because you just changed your first clutch!

Hope this helps,


Sep 16, 2009 | Aprilia RS 125 Extrema Motorcycles

1 Answer

Kx 125 2003

im pretty sure that the bike is a all in one menin that oil in tranny is same that flows in motor

Jul 22, 2009 | 2003 kawasaki KX 125

1 Answer

1200 goldwing clutch slip

Six yrs, is a long time. You really should change the oil. Oil also breaks down like gasoline does. Wet clutches require an oil containing certan sdditives. Old or regular motor oil is not well tolerated. Make sure you have free play on the clutch lever., about 1/8 in. - good luck- Ned

Jun 21, 2009 | 2001 Ducati 750 SS i.e. N-C

1 Answer

Clutch pro

5w of oil difference is not the problem but using hypoid oil in the trans case will. Change the fluid and make sure you have the clutch adjusted correctly I believe it is 37mm from clutch cable boss on the block to the point on the top of the clutch pivot arm where the cable attaches. ,,

Nov 10, 2008 | 2003 ATK 500

Not finding what you are looking for?
2002 Harley Davidson FXD Dyna Super Glide Logo

201 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4577 Answers


Level 3 Expert

4345 Answers


Level 3 Expert

78010 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides