Question about 2008 BMW HP2 MegaMoto

1 Answer

Engine dying

I had HP2 MegaMoto my brother riding it around about a month ago just fine for a few hours (we had unseasonally warm weather). I tried riding it yesterday (warm temps here we come) however I am running into a problem. The bike started and warmed up fine, at least I think so, but when I went to put it into gear and release the clutch it immediately dies no matter how high I rev it or how slowly/quicly I start releasing the clutch, it kills the engine immediately. It restarts with no problem. Anybody have any ideas? Thanks for your time.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Check your kick stand sensor if it's unplugged then there is your problem. If it's still plugged in then the sensor might be gone. The sensor shuts the bike down if you try to take off when the kick stand is down. you can bypass the sensor by jumping the two wires before the sensor with a piece of wire connecting the two leads together. doing so will allow the bike to be put into gear with the kick stand down so always check it so you won't have an accident.

Posted on Nov 20, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am looking for a hp2 underseat tank


Hi, Anonymous for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. If necessary, transport your bike to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day.
Underseat tank for HP2
GS Equipment Markus HP2 7L Underseat Fuel Tank
Free BMW Motorcycle Service Manuals for download
BMW Motorcycle Parts Fiche OEM BMW Motorcycle Parts online 1970 present BMW
http://www.bmw-motorrad.com/us/en/index.html?content=http://www.bmw-motorrad.com/us/en/services/manuals/manuals_main.html¬rack=1

Sep 30, 2013 | 2008 BMW HP2 MegaMoto

1 Answer

WHERE CAN I BUY A HP2 ENDURO UNDERSEAT TANK


Hi, Anonymous I am sorry you can't find the first and best tool you ever bought for your BMW but despair not for a mere $0 you can download another one. For more information about your issue, please visit the websites below. Good luck and have a nice day.
GS Equipment Markus HP2 7L Underseat Fuel Tank
Underseat tank for HP2
Free BMW Motorcycle Service Manuals for download
BMW Motorcycle Parts Fiche OEM BMW Motorcycle Parts online 1970 present BMW
http://www.bmw-motorrad.com/us/en/index.html?content=http://www.bmw-motorrad.com/us/en/services/manuals/manuals_main.html¬rack=1

Sep 21, 2013 | 2008 BMW HP2 MegaMoto

1 Answer

Lets try this again. Tahoe battery was dead for 24 hours. We jumped it off, ran fine for a 10-15 minute drive. Got home, it sat for 4-5 hours and had to run an errand. Tahoe fired right up, put it in...


Check engine light come on ? You should have some testing done ! Fuel pressure an flow testing , Scan tool data checked . Charging system , battery , connections , cables . What data does scan tool show for mass air flow sensor , what are the fuel trims at ? If you don't know what these are you need to take it to a qualified repair shop .

Jun 02, 2017 | 2001 Chevrolet Tahoe

1 Answer

I don't have a problem yet. I'm buying a 1997 Honda Shadow Vt 1100 from my sister-in-law. My step brother died a few months ago and she want's to sell me his bike, my question is I know how well my...


If the bike is in good running order you should be able to drive it every day form dusk to dawn. 10-12 hour rides should be no trouble what so ever. If the motorcycle has been sitting and not run for a few months and your intention is to hop on and ride it six hours to your house, you may want to consider either trailering it home or taking it for a couple of short drives just to verify it is running properly before attempting the long drive home.

Jan 26, 2011 | 1997 Honda VT 1100 C2 Shadow Sabre

2 Answers

I have a 2001 Suzuki SV650. When I purchased it (about a month ago), a new battery was installed. The bike was running fine, but 4 days ago, the battery died. So I hooked it up to a trickle charger, and...


sounds like a charging system. same thing happens with cars when the alternator goes kaput. so i would say check your charging system weather it be an alternator or generator.

Jul 15, 2009 | 2001 Suzuki SV 650 S

1 Answer

Truck dies


TRY CHANGING IGNITION COIL

Dec 04, 2008 | 1989 Dodge Raider

1 Answer

Shuts off


Sounds like some kinda bad electrical connection. Check all your wireing is good and all connections are tight. Then start checking things like the switch gear on the bars and ignition switch. A voltmeter will be a very handy tool for this.and also Check your Battery cables, especially the Ground.

Nov 20, 2008 | 2007 BMW HP2 MegaMoto

1 Answer

Engine clutch mess


Check your kick stand sensor if it's unplugged then there is your problem. If it's still plugged in then the sensor might be gone. The sensor shuts the bike down if you try to take off when the kick stand is down. you can bypass the sensor by jumping the two wires before the sensor with a piece of wire connecting the two leads together. doing so will allow the bike to be put into gear with the kick stand down so always check it so you won't have an accident. good luck and get out ridding!

Nov 10, 2008 | 1993 Yamaha FZR 250 R

1 Answer

2001 Kia Rio Engine Cranks, Won't Fire, Reoccuring


i am having the same problem, thought it was ful pump, no go, I heard they had problms with the fuse box and wiring harness, my mechanic messed with mine a few days ago and it has not did it since, but I am looking at changing that. GL

Aug 01, 2008 | 2001 Kia Rio

Not finding what you are looking for?
2008 BMW HP2 MegaMoto Logo

328 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

Mike Gilbreath

Level 1 Expert

50 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...