2006, suzuki forenza, 2.0, head bolt torque sequence?

Bearing cap bolts, yes.
the bolt that holds the camshaft gear, no. It is a torque to yield bolt.

https://www.google.com/search?q=2006+Suzuki+Forenza+reuse+camshaft+bolts

.. ..

cylinder head bolts to 25 Nm (18 ft. Lbs.) And turn the bolts another 3 turns of 90 using the angular torque gauge KM-470-B
use either newton meters or ft/lbs. One is imperial and the other is metric Place a rock on a scale and weigh it in lbs of kg it is the same weight

fel_pro_torque_specs_guide.pdf

the USA 2.0L engine, key words, country and engine size.
the 1million post with guy working an engine can say what is there.
amazes me. .that....
its been posted on fixya before , the 2.0L engine.
did you search, answer , no....
and want both, but failed to ask it bolts are
1: REUSABLE
2: OR TTY
That is first on all modern engines.
as is do i use degree';s or torque on this engine?>
do so on all engines.
why not use the FSM book from suzuki and read.
like we do, we look read and know.
in 5mins work.
$4 read
https://suzukipitstopplus.com/Products/1068-2007-forenza-reno-service-manual.aspx

so ill login to my carppy online clone of above
and say what's there.

why ask for internet rumors on car engine rebuilding
what if the rumor was WRONG.? that work for you>?
no my rumors.. usa cars
2.0L
and these words, step 1.
"Cylinder head bolts. Tighten the cylinder head bolts gradually and in the sequence shown. Tighten the cylinder head bolts to 18 ft. lbs. (25 Nm) and turn the bolts another 3 turns of 90 degrees using the angular torque gauge KM-470-B."
again, our USA 2.0L engine only,
it does not state new bolts.



end rumor off clone, FSM site , USA>.... YMMV....
your motor may vary.

usa car or where?
my guess you meant
head bolt torque sequence?

the factory FSM is $4 to read, posted 100s of times here.

1.4 L E-TEC I4 (petrol)
1.6 L E-TEC I4 (petrol)
1.8 L Family II I4 (petrol)
2.0 L Family II I4 (petrol) (my guess this???????))
2.0 L RA 420 I4 (diesel)

https://suzukipitstopplus.com/Products/1066-2006-forenza-reno-service-manual.aspx
4 buck so see staging rates , sequence and if TTY bolts
or if its angle set.

Torque Specifications, Spec.s ( read the FSM book>? see if its TTY bolts, regular bolts or bolts set by angle not torque?) that be like first. on all cars.... and the sequence is there too....

what engine there are 4 at least on this car.
we cant guess engines here,

to work on any engines, first know what is there.
post the vin,
or better the EPA hood sticker tells you what is there.

here is the line up, which engine.

1.4 L E-TEC I4 (petrol)
1.6 L E-TEC I4 (petrol)
1.8 L Family II I4 (petrol)
2.0 L Family II I4 (petrol)
2.0 L RA 420 I4 (diesel)

the book is 4 bucks

USA cars only, !!!!
https://suzukipitstopplus.com/Products/1066-2006-forenza-reno-service-manual.aspx

post engine size. they use like 6 engines.
open hood, look up , see that EPA tag, it says right there.
no man on earth can guess engines. not ever.
(sure, rare exeptions, on 2 door sports cars)

which engine?

head torque specs for 2004 suzuki forenza are 18ft IBS then 90 degrees in sequence 3X