Question about 2007 Bajaj CT 100

2 Answers

Want to know what is the valve clearance of bajaj ct-100 m/c?

Proper ways of adjusting valve clearance

Posted by on

  • Anonymous Mar 16, 2014

    what is valve clearance for the motorcycle

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 41 Answers

Get the engine on top dead center, take valve caps off turn over engine slowly until intake valve just closes u will be close to top dead center there. then i use a small long screwdriver i put in sparkplug hole and turn engine very slow when piston just startes to go back down i adj valves. intake valve 3 thousands and ex valve 5 thousands

Posted on Nov 25, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

WHITE IS THE PROPER FEELER GAUGE INLET AND EX VALVE?

Posted on May 27, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Valve clearance on suzuki vitara 1999 1.6


  • Set the engine to Top Dead Centre (TDC) of the compression stroke for the cylinder to be adjusted.
  • Check the valve clearance. The valve clearance specifications are as follows:

    Intake valves: 0.005-0.007 inches (0.13-0.17mm) Exhaust valves: 0.005-0.007 inches (0.13-0.17mm)
  • After adjustment, tighten the lock nuts to 11-14 ft. lbs. (15-19 Nm).
  • Repeat for each valve to be adjusted.
  • Feb 16, 2017 | Suzuki Cars & Trucks

    1 Answer

    Valve clearance


    Valve clearance Google search your year make and model valve clearance. Check the attached links,instruction and guides, Good luck
    "I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
    Checking and adjusting valves
    Engine Valve Adjustment Procedure The Right Way
    Valve Clearance Adjustment
    Valve clearance Google Search

    Aug 10, 2016 | Cars & Trucks

    1 Answer

    What is the valve clearance for intake valve and exhaust valve for mitsubishi engine 4D32?


    Please follow link to complete instuction's on the Correct way to set valve clearance on the 4D32 engine type.
    6 INTAKE AND EXHAUST VALVE CLEARANCE INSPECT AND ADJUST

    May 15, 2016 | Mitsubishi Cars & Trucks

    1 Answer

    I own 95 toyota 4runner. I would like to check.and adjust the valves. Will someone walk me thru the right way of doing this?Thank you.


    First of all you will need a decent set of tools. depth feeler gauges, a workshop manual with the valve clearances, and a method of turning the engine by hand. You will need to take off the valve covers. After this you can check each of the valves for clearance by sliding the feeler gauges into the gap between rocker-arm or cam lobe and valve or tappet. Trick is you can only do this when the engine is in the correct position, so consult the manual and rotate the engine by hand accordingly. Remove the spark plugs to make rotating the engine easier. Adjust the tappet to gain the proper clearance as documented in the workshop manual. The feeler gauge should drag just slightly as you slide it out or slide it in. In ideal conditions I would guess this is about a 2~3 hour job, assuming ideal conditions, and not too much stuff in your way that will need to be moved. If your working at home, those are not ideal conditions.

    For the record I've only done this sort of job on motorcycles, so I've never actually adjusted tappets. The theory is the same though.

    Oct 22, 2014 | Cars & Trucks

    1 Answer

    Valve settings


    - Pull the hand brake and put transmission in neutral.
    - Remove spark plug cords.
    - Remove the spark plugs.
    - Remove the Tappet cover
    - Lift up the left front wheel.
    Cylinder number 1 is toward the pulleys and belts side.
    - Rotate the crankshaft anticlockwise with socket and extension rod and bring the valve tappets (intake and exhaust) No. 4 cylinder on dancing position.
    NOTE: THERE ARE OTHER WAYS ALSO TO ADJUST THE FOUR VALVES AT A TIME. BUT AS DIY FOLLOW THE FOLLOWING METHOD TO AVOID ANY CONFUSION.
    - Adjust the valve clearance of number 1 cylinder.
    Valve clearance:
    Intake 0.18 - 0.22 (cold) Exhaust 0.25 - 0.28 (cold)
    - Rotate the crankshaft anticlockwise to bring the valves of cylinder 2 on dancing position and adjust the valves of No. 3 cylinder.
    - Similarly rotate the crankshaft to bring the valves of No. 1 cylinder on dancing position and adjust the valves of No. 4.
    - Rotate the crankshaft anticlockwise to bring the valves of cylinder No. 3 on dancing position and adjust the valve clearance of No. 2 cylinder.

    May 04, 2013 | 1999 Honda Civic

    3 Answers

    What is the proper valve clearance for kawasaki wind 125


    .06mm tappet adjustment on the filler gauge

    Sep 02, 2011 | 2006 Bajaj Wind 125

    1 Answer

    Missfire, blows back through the air filter under seat?


    sounds like you have an intake valve not seating,

    check valve clearance, adjust if necessary - The valve clearance check/adjustment must be done on cold engine only, not warm and not hot.

    If you needed to adjust and you have done it, the backfire will go away.

    If your did not need to adjust, and you still have a backfire, you probably have a bent valve.

    The only way the backfire is allowed to pass through intake, is if the intake valve is not closing all the way.

    Dec 07, 2010 | 2004 Triumph Rocket III

    2 Answers

    Overhead valves making noise like they need ajusting


    Valve Lash ADJUSTMENT 1.6L Engines NOTE: Measure valve clearance with the engine cold.
    1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
    2. Remove the valve cover.
    3. Set the engine to Top Dead Center (TDC) of the compression stroke for the cylinder to be adjusted.
    4. Check the valve clearance. The valve clearance specifications are as follows:
      • Intake valves: 0.005-0.007 inches (0.13-0.17mm)
      • Exhaust valves: 0.005-0.007 inches (0.13-0.17mm)
    5. After adjustment, tighten the locknuts to 11-14 ft. lbs. (15-19 Nm).
    6. Repeat for each valve to be adjusted.
    1.8L, 2.0L and 2.5L Engines The 1.8L, 2.0L and 2.5L engines utilize automatic hydraulic lash adjusters to maintain proper valve lash at all times. Periodic valve lash inspection and adjustment is not necessary or possible. prev.gif next.gif

    Sep 14, 2010 | 2000 Chevrolet Tracker

    1 Answer

    Want to know what the valve clearances are for my 1999 hyndai excel


    Adjust the jet valve clearance before the adjustment of the
    intake valve clearance.
    Jet valve clearance (hot engine)
    [Standard value]. . . . . . . . . . . . . . . . . . . 0.25 mm (0.010 in.)

    now adjust valve clearance
    Valve clearance (hot engine) [Standard value]
    Intake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.15 mm (0.006 in.)
    Exhaust. . . . . . . . . . . . . . . . . . . . . . . . . . 0.25 mm (0.010 in.)

    Jul 30, 2009 | 1990 Hyundai Excel

    1 Answer

    Need to know how to adjust valves, or a print-out of adjustment procedure and tools reguired. 1989 toyota gt-s corolla 1600 16 valve 4a-ge cal engine


    This engine utilizes shims to set proper clearances, you will need a micrometer, valve clearance adjustment tool set for shimmed lifters,small magnetic arm, appropriate shim selecting charts (manufacturer will have this if you can get the nec. measurements).
    Measure thickness of shims removed (using micrometer) and use this formula where T=Thickness of old shim; A=Valve clearance measured; N=Thickness of new shim required.
    Intake valves:   N = T + (A - 0.02 mm (0.008 in.)) Exh. valves:     N = T + (A - 0.25 mm (0.010 in.))
    Then you need to find shims as close as possible to the calculated values.
    Valve clearances (cold) are as follows: Intake 0.15 - 0.25 mm (0.006 - 0.010 in.) Exhaust 0.20 - 0.30 mm (0.008 - 0.012 in.)
    Note, if you are not familiar with precision measuring using a micrometer, this may be better left to a trained tech. These are high revving little power plants and you don't want a problem at 8K rpm.

    Jun 05, 2009 | 1989 Toyota Corolla 2 Door

    Not finding what you are looking for?
    2007 Bajaj CT 100 Logo

    Related Topics:

    990 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Bajaj Experts

    sachin sharma
    sachin sharma

    Level 2 Expert

    171 Answers

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17130 Answers

    Arnie Burke
    Arnie Burke

    Level 3 Expert

    4536 Answers

    Are you a Bajaj Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...