1992 Yamaha FZR 1000 Logo
Anonymous Posted on Apr 26, 2012

Fzr 1000 engine sat then locked up

My bike was running fine and I stored it for winter and now it is locked up. I don't understand.

5 Related Answers

Anonymous

  • 104 Answers
  • Posted on Feb 05, 2009

SOURCE: oil change on my 1990 fzr yamaha 1000

20/50 shouold be fine oil drain plug is under the belly pan

Ad

Anonymous

  • 98 Answers
  • Posted on Mar 10, 2009

SOURCE: 91 yamaha fzr engine turns but wont start

the floats in the carb are stuck. you can try lightly tapping on the carb with a screwdriver that should do the trick.

Anonymous

  • 1 Answer
  • Posted on Mar 30, 2009

SOURCE: 89 fzr 1000 fuel pump problem

It seems likely that your fuel pump is not operating, you should hear the fuel pump priming when you turn on the ignition, if not the fuel pump is at fault, this is not uncommon and a replacement is the answer.

Anonymous

  • 8 Answers
  • Posted on Jul 05, 2009

SOURCE: yamaha fzr 1000 exup 1990, bike's been standing

this happens after they sit a while, get her started, get her rolling, put her in second gear, hold the clutch in, get her up to 20 miles an hour, hold a little throttle on and slam on the rear brake, this usually will free up the stuck friction plates. If not try it a couple of times, it has always worked for me, also if that does not work for you you have to take the side cover off of the engine (clutch side) and using a flat headed screwdriver, and a zip tie to hold the clutch lever back to the handle bar, place the screwdriver in between the clutch plates and gently pry them apart from each other, on your bike I believe you have 7 friction plates and 6 steel plates. ( if you have to remove the cover go get a gasket first).

Anonymous

  • 7 Answers
  • Posted on Sep 14, 2009

SOURCE: FZR 1000,timeing chain rattle

check the cam chain tensioners.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Idle and clutch issue

main jet blocked and clutch damage maybe bent clutch push rod or plates seized together
1helpful
1answer

Gtr 1000 pushed starter clonk from engine engine seems locked solid

classic kawasaki hydraulic lock symptoms...basically a combination of sticking fuel tap plunger and sticking float valve on one of your carbs causes a cylinder to fill up with fuel. As this will not compress when the engine turns over the cylinder then locks up with a clonk. Easily confirmed by checking the oil as this will be contaminated with fuel...the level will have gone up and there will be a smell of petrol when you remove the filler cap. Unfortunately the commonest result of hydraulic lock is a bent conrod requiring an engine rebuild to replace.
2helpful
2answers

I have a 1990 fzr 1000 I'm missing the right rear

http://www.bikebandit.com/houseofmotorcycles/1990-yamaha-fzr1000a/o/m7195#sch120213

try this site it has alot of oem parts for alot of bikes
1helpful
1answer

Bike started sputtering espeacially when cold after sitting thru the winter Would like to know how to change the fuel filter to see if thats the problem

Most likely the problem is not the fuel filter. Since the bike sat through the winter, it is probably fuel gummed ports/jets. This is happening more often especially with the ethanol blend of fuel. In the last few weeks, as riders bring their bikes out of winter storage, there has ben many with the same problem as yours. I recommend pouring at least 1/2 can of SeaFoam in the tank, lock down the front brake and rock the bike back and forth to mix the additive. Once it is mixed, crank the engine and run at high idle for a couple minutes. Let it set for an hour or so to give the SeaFoam time to work. Crank the bike, and ride normally. It should clear up. If it doesn't clear up in an hour or two, you may have water in the carb bowl that will have to be drained.
0helpful
3answers

Fan running all the time

This is an ignition problem, (probability of short circuit in the ignition head wiring). U may have to repair this.

tx.
0helpful
1answer

91 yamaha fzr engine turns but wont start

the floats in the carb are stuck. you can try lightly tapping on the carb with a screwdriver that should do the trick.
1helpful
2answers

Oil change on my 1990 fzr yamaha 1000

20/50 shouold be fine oil drain plug is under the belly pan
Not finding what you are looking for?

107 views

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

vince

Level 3 Expert

2530 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

littlewheel

Level 2 Expert

122 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...