Question about 2001 Yamaha SR 125

1 Answer

Front forks I am in need of front forks and wheel for a yamaha enticer 125,, i have found these are impossible to get in the UK, and cant find anywhere to get them fron the internet,, Question,, is there another bike with the same fork measurements,, and where can i get them,,The forks measure.. 30mm at the yolk and are 770mm long. Any help would be much appreciated. ps,, have selected the sr 125 on the drop down box, other wise i cant submit my mail Terry

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

Try e bay but youll be ordering it from the states probably i hope you can find them jsut go to and find your product 95% of the time its in good condition ive never had a problem with the sight good luck bro

Posted on Nov 14, 2008

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Yamaha yz 125 front forks fit a yamaha maxter xq 125

just measure your fork leg diameters and compare them to the yz ! you could also see if the yz fork clamp headstock bearings and steering tube will fit your bike !

Jan 20, 2014 | Yamaha Motorcycles

1 Answer

How can i change the front wheel of yamaha dt 125 , model 2004

Hi, Anonymous sorry you can't find the first and best tool you ever bought for your Yamaha despair, not for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please visit the websites below. Good luck and have a nice day.
Change Motorcycle Tire
How To Install Front Motorcycle Wheel and Tire from SportbikeTrackGear com
OEM parts for Yamaha

Mar 28, 2013 | 2004 Yamaha DT 125 R

1 Answer

Front fork adjustment on 2002 yz 125

Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
2002 YZ125 suspension tuning HELP Yamaha 2 Stroke
Yamaha YZ125T1 Owner Service Manual
OEM parts for Yamaha

Mar 24, 2012 | Yamaha YZ 125 Motorcycles

1 Answer

How to change the berings in the front fork (stering) i cant open the big 27 screw on the top. Yamaha TDR 125

well to change the steering head bearings,

firstly you need to take off your headlight or anything thats in the way just to make it a little easier, then you put the bike on a stand and get the front wheel off the floor, un bolt the top yoke (clamp) from the forks, then you MUST un bult that 27 screw on the top of the sterring colum, if you must use vice grips and buy a new bolt/ nut.

when the top half is finaly loose you can pull the handle bars up and the top yoke will come off, and the bottom half with the wheel and forks will also come out with a tap or it might just come so watch yourself and the bike. then you can put new bearings and put it all back together the same way you started.

for more help email me (

Feb 17, 2010 | 2000 Yamaha TDR 125

1 Answer

Fork oil capacity

medium fork oil - 150 mls in each leg

Nov 01, 2009 | 2005 Yamaha Ybr 125

1 Answer

Fork fluid

If there is no fluid on the fork legs or the wheel the fluid very likely isn't leaking and is OK.
If there is fluid the fork legs need servicing at which time the fluid will be drained and replaced.

Jun 06, 2009 | 2001 Yamaha XVS 650 Dragstar Classic

1 Answer

Uneven front tire wear

Idoubt your fork fluid levels have anything to do with uneven tyre wear,depending on where you live dictates how your tyre wears,if you live in uk then you tend to turn right more than left therefore wearing the tyre more on the right and reverse this for anywhere they drive on the wrong side of the road.tyre pressures are important... to check the fork fluid level you need to drain the oil into a measuring jug,compare result to manufacturers recommendation.if you are not mechanically competent do not attemt this as you may get hurt as the fork internals are under load from a spring

Jun 04, 2009 | 2001 Yamaha V Star 1100 Classic

1 Answer


got to do the fork sils and i dont no how much oli to use help

Mar 08, 2009 | 2001 Yamaha SR 125

1 Answer

Can you straighten torqued front forks on a 2002 Yamaha TTR 125 L

you should be able to saporrt bike so front wheel is off the ground   then take a marker and put lines around where the forks meet the triple trees that hold them in place their should be some allen head bolts that u can loosen on front of the triple clamps  once these are loose you should be able  to move the forks back to strait again in line with the handle bars just line the lines up that u put on them earlier and tighten the allen bolts back up    also  when making the lines  make them from left  to right so marker is touching both fork tube and triple clamp   this is only so you get can keep them the same ride hight as before 

Feb 15, 2009 | 2002 Yamaha TT-R 125 L

Not finding what you are looking for?
2001 Yamaha SR 125 Logo

Related Topics:

222 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1128 Answers

D. E. Hev

Level 3 Expert

1059 Answers


Level 2 Expert

61 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides