At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
the nut is round and the inside looks like a alan wrench or something. What size do I need to get the nut loose to check my levelsthe nut is round and the inside looks like a alan wrench or something. What size do I need to get the nut loose to check my levels
AnonymousMar 22, 2014
the nut is round and looks like the centre has an alan wrench but what sizethe nut is round and looks like the centre has an alan wrench but what size
AnonymousMar 28, 2014
just to replace drivers side mirrorjust to replace drivers side mirror
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
? 8:16
https://www.youtube.com/watch?v=Bmm9M28dqv4
Mar 10, 2014 - Uploaded by bimmermerchant
BMW 540i Side View Mirror Removal 525i 530i. bimmermerchant ..... A truck recently side swiped my ...
? 2:31
https://www.youtube.com/watch?v=uUcpzHx2ZR0
Jan 6, 2013 - Uploaded by AutoandTruckMirrors
This How To video offers you easy step by step instructions on how to remove and replace a broken side ...
? 13:58
https://www.youtube.com/watch?v=ldjeQsnAJ9M
Jan 26, 2014 - Uploaded by Daniel Scheer
This video is a step by step instruction for the removal andreplacement of the side mirror on a 1996-2007 ...
? 3:00
https://www.youtube.com/watch?v=saIEH-CxRkY
Aug 10, 2014 - Uploaded by DIY Mechanics
VW Golf MK4 - how to remove/replace door wing mirror video ... How To install Replace Side rear View ...
Hi, the door panels need to be removed,there are 3 mounting nuts, and a wiring harness,(if mirrors are power).unhook the wire, take the 3 nuts off, and remove the old mirror.Repeat for the other side,and the mirrors should be functional.Good luck...
Mirror, Power — Outside Rear View
NOTE: This procedure applies to both RH and LH power outside rear view mirrors.
Removal
Remove the front door trim panel (23942). Refer to Section 01-05 for the removal procedure.
Remove the two outside rear view mirror inside mounting hole cover screws and the outside rear view mirror mounting hole cover (17K709) from the front door (20124).
Remove the wire clip.
Disconnect the power outside rear view mirror electrical connector.
Remove the three power outside rear view mirror bolts and the power outside rear view mirror.
Installation
To install, reverse the removal procedure.
Tighten the three power outside rear view mirror bolts to 3-4 Nm (27-35 lb-in).
Glass, Outside Mirror Removal and Installation
Refer to the glass replacement procedures in Manual Mirror for power outside rear view mirror glass (17K707)
Trim Cover Removal
Remove the front door trim panel. Refer to Section 01-05 for the removal procedure.
Remove the two outside rear view mirror inside mounting hole cover screws.
Remove the outside rear view mirror mounting hole cover.
Installation
To install, reverse the removal procedure.
Mirror Control Removal
Use a small flat-blade screwdriver to pry the power outside rear view mirror control switch from the instrument panel (04320).
That dependso on if the housing itself is broken then yes. If the face plate that is attached to the mirror itself is flapping around then maybe. If it is just the mirror, just go to your neighborhood auto glass shop and but a "Ready-Cut" mirror for a small amount of money. they come already cut to fit perfectly. As for removing the old glass, take a very small flat screw driver and pry the glass away from the face plate. Once completely cleaned out use the adhesive from the ready cut and place them on the face plate. Next press the new mirror onto the flace pate, being careful not to press to hard or it will snap it in half.
Running wires from external sensors is going to be a difficult job because you have to drop the headliner and the left A post cover for access to the wires. There are manuals available at auto parts stores that have diagrams, but you need to be sure that it covers the wiring for the new mirror.
Fig. 2: Outside mirror-below eyeline type
How does one replace the entire mirror assembly?
the nut is round and the inside looks like a alan wrench or something. What size do I need to get the nut loose to check my levels
the nut is round and looks like the centre has an alan wrench but what size
just to replace drivers side mirror
×