It wont go back to get key out
Vt have a nasty problem of snapping inside the back of the ignition,there is a black plastic back on the ignition this is broken try and pry this off then it should release the key ,but dont turn the key forward ,this will wreck the ignition turn it backwards
SOURCE: i have a R reg
Most likely there you have a security system VAT (Vehicle Anti-Theft) module. If you try to bypass this the car will not start. Have a mechanic or yourself get to the main wiring harness to the ignition in the steering column under the dash, unplug it and use another ignition with a key in it to learn the security system code first before trying to start it.
SOURCE: the key has broken in
on the left side of barrel, look for a dowel, there should be a vary small opening that you can take something as small as a pinhead and push the dowel in ,while pushing in on dowel pull the barrel out.the key may need to also be in on position for removal. try that and see if it works. if not please repost your question. thank you for choosing fixya.com
SOURCE: iv taken ignition barrel off iv got a bit of metal
can u not use a stong magnet r twesers to retreve it ? if not ther shud b littel grub skrew or ser clip that will need to b taken out then it shud pull aprt b curefull lots of fidely bits that can b lost
SOURCE: key ignition barrel does not turn 2000 avalon
i can turn the key to acc but will not go any further.
Have you checked the oil lately? Might need changing also the filter.
2,294 views
Usually answered in minutes!
×