An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert whose answer got voted for 500 times.
Re: take off seat
There should be two bolts behind the passenger seat, take those out. pull the strap on the passenger seat forward and pull the seat back. after you take the passenger seat off you can see the bolts for the front seat, take them off and back the seat out of the lip.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
First, make sure your air cleaner is not plugged or dirty. This will cause a rich mixture. Next make sure the choke is completely off when bike is running. Gas is not leaking past the choke plunger seal. If the mixture needs to be adjusted , it is the screw under neath the carburetor, up front by the intake manifold. Before making any adjustments, count the number of turns IN, before the air screw seats lightly. This should be the factory setting. Call a dealer and find out what the standard setting should be. Start there and make minor adjustments(1/8 turns) till you get the spark plug color you desire.
It is located between the Intake Manifold on the engine and the Air Breather, which is under the seat. To remove, turn the fuel shutoff valve to OFF. Remove the fuel supply hose from the carb; it may help to leave it in place on the shutoff valve. Loosen the hose clamps that connect the carb to the Air Breather and the Intake Manifold. On the right side of the bike, you will have to remove the cover and cables for the throttle control. The cover should be held on by two small screws. The cables will come out of their grooves, but you may have to work at that a bit.