Question about 2007 Husqvarna CR 125
I just got some work done on my bike and had the forks changed....so the front calipers were removed and reintalled. After that, I changed the entire right clip-on with master cylinder. I'm tring to bleed the front brakes but not getting anywhere with it. I bought a $7 bleeder from autozone and started by bleeding the calipers first one side at a time. I slightly loosened the nut, insert the bleeder tip, pressed in the lever, loosen the nut more and fluid starts to go through the bleeder, then tighten the nut and pump the brake lever once...repeated this until fluid is clearly through the bleeder line with no bubbles. I did this for both caliper and then the nipple next to the master cylinder. If the bike is standing still, I can pump the lever and start to feel tension after a couple of pumps, but once I start moving, it just dies, and there is no tension. I tried pumping the lever while going abt 5mhp and I could feel it starting to work, but after a while, it goes back to the same problem... This is my first time bleeding any brakes, any help would be appreciate. thanks,
Bleed the master first, make sure that there is plenty of fluid going through there and all the air is out. Then, once the master is fully bled, the fluid will pull through the lines quickly. Just do one line at a time, and once you do them both and get good pressure you want to zip tie the lever to the bar overnight to make sure you get all the little bubbles out. Hope that helps.
Posted on Nov 10, 2008
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jul 22, 2014 | Motorcycles
May 13, 2014 | Harley Davidson FXD Dyna Super Glide...
Jun 19, 2009 | 2000 Yamaha DT 125 R
Nov 10, 2008 | 2005 kawasaki KX 250 F
Nov 10, 2008 | 2006 kawasaki ER-6f
Nov 10, 2008 | 1996 Suzuki VX 800
Nov 10, 2008 | 1985 Suzuki Rg 250 Gamma
Nov 10, 2008 | 1989 Suzuki GSX 550 EF
Nov 10, 2008 | 1992 Suzuki GSX-R 750 WN
Nov 10, 2008 | 2007 CCM 404 Enduro
173 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: