Question about 1990 Suzuki GSX-R 250

1 Answer

Rpm  Hi every One, My son in Law Has bought GSXR super sport and he is concerned that at 100kms\´ per hour that the rev counter is showing just on 10,000 rpm is this correct. Thanks

Posted by on

  • Anonymous Mar 12, 2014

    hi i have a gsxr k7 750 losing power at 10000 rpm at start and go its fine lifts the weel but as temp increase it looses power revs cleen but


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 2,336 Answers

This is actually designed to run at those revs. It\´s basically the best way to maintain reasonable power to wheels at high speeds with an engine that is not powerfull enough to produce the HP needed to maintain that speed or higher speeds with a higher gear ratio.

Posted on Nov 10, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I go about fixing a reving issue on my bike? It doesnt like to rev past about 10,000 rpms. I was thinking maybe the carbs need to be rejetted. The bike will rev to redline in neutral.

Hi, Ani and the usual suspects are:
1. Severely drained or faulty battery.
2. Faulty regulator/rectifier or high output coil.
3. Faulty power valve, solenoid or installation.
4. Clogged air filter or exhaust.
5. Cracked or incorrect float level.
6. Float needle is not seating.
7. Faulty reed valve.
For more information about your question and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
02 GSXR 750 won rev past 8k
2002 750 wont rev past 8000
Wont rev past 10000 RPM

May 21, 2016 | Power Motorcycles

1 Answer

Rev counter not working

Hi Anthony, I am sorry you can't find the first and best tool you ever bought for your Aprilia but despair not for a mere $10 you can download another one. For more information about your issue, please visit the websites below. Good luck and have a nice day.
DOWNLOAD Aprilia Rs 125 Motorcycles

Mar 18, 2014 | Aprilia RS 125 Motorcycles

1 Answer

Triumph twin, the rev counter has started to read below the real rpm. The faster the revs the more wrong is the tacho

The inner part of the cable could be slipping / warn out or broken.
Check the cable where it attaches at both ends, tighten up if loose.
Take the cable off and check the ends for obvious wearing, if the inner cable looks damaged, replace with a new one.
Hope this helps.
Some bikes have a totally different set up to how they read the rpm
you could try a after market rev counter, good luck

Feb 06, 2014 | 1999 Suzuki GSX-R 600

1 Answer

Just bought a 1993 suzuki gsxr 750. has been sitting in a garage for 2 years. we took the carbs off and cleaned them really well, changed the oil, and air filter and we added new gas. bike starts up and...

If is runs better with full choke, then the bike is lean, check for air leaks at the carb manifold, vacumn cracked hoses, non standard exhausts, perhaps the mufflers have rusted out while sitting

Apr 24, 2011 | 1993 Suzuki GSX-R 750 WP

1 Answer

I have the 08 yamaha r1. When I hit 6th gear its stops at 100mph, so then I heard about rpm but don't know if its real or fake and if that will fix my problem

Not sure what you heard about rpm?
They are definately real, it means revolutions per minute, and is how fast the engine is spinning.
watch the rev counter( or rpm counter) and see if is going up to 10,000-11000 thousand. if it does you may have a slippng clutch

Jan 17, 2011 | Yamaha YZF-R1 Motorcycles

1 Answer

Y wont my brand new xr250 2005 model go faster than 90kms

It is possible that your bike has been governed from the factory to only reach a certain maximum RPM, they do this so you don't inadvertently over rev the engine and blow it up.

If the bike is not governed you might have to re jet the carb, altitude and other factors can change your fuel/air requirements and cause improper operation of your fuel system therefore the maximum RPM.

Jun 07, 2009 | 2005 Honda Xr 250

1 Answer

98 gsxr cuts out around eight g when accelerating but fine in N

Sounds like you're running out of fuel. It doesn't take much power (ie, fuel) to rev it in neutral, which might explain why it does that fine but falls over under load. Checked your fuel pressure/pump/filter?

Apr 15, 2009 | 1998 Suzuki GSX-R 750 W

Not finding what you are looking for?
1990 Suzuki GSX-R 250 Logo

Related Topics:

238 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts


Level 3 Expert

63587 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4497 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides