Question about 2005 Suzuki GSF 650 N Bandit

1 Answer

Raise the seat

How do you raise the seat on a new 2007 gsf 650 suzuki bandit?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,336 Answers

First take off the seat, turn it upside down, unscrew the two screws and two bolts that hold the two parts of the seat together. Separate the pillion and rider seat (takes a bit of wiggling), now you can concentrate on the riders seat. undo the four screw that hold all the rubber gromets down (make a note of the direction they are facing), and unbolt the two small bolts on the front. The seat should now come apart, move the bracket at the back of the seat down a hole. Re-attach the two halfs of the seat at the front but this time one hole up. You should see a gap between the two halfs. Put the rubber gromets back on, this is where I went wrong the first time, TURN THE FRONT TWO 180 degrees and leave the back ones how they are. Screw everything back together and you have one raised seat my long legged friend.

Posted on Nov 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to lower seat by about an inch


maybe check with your local upholstery store and see if they can remove some seat foam, or look into a replacement seat from places like

mustang seat..

Feb 23, 2010 | 2007 Suzuki GSF 1250 Bandit

1 Answer

How to adjust seat height on a 1250 bandit


not much you can do ,maybe turn the rear shock to a ofter setting,your bike manual will show how to adjust that but it will only be a small amount, maybe contact your local seat repair shop and have them remove some seat foam or look into a after market seat ...

www.mustangseats.com

Jan 16, 2010 | 2007 Suzuki GSF 1250 Bandit

1 Answer

Changing the time on the clock on my suzuki gsf 650 k6


Typically Suzuki bikes all set the same way. Turn the ignition on, press the select and reset buttons together. The trick is to press the reset marginally before the select and hold them until the time starts to blink, you will work out pretty easily which button alters hours and minutes.

Nov 24, 2009 | 2005 Suzuki GSF 650 S Bandit

1 Answer

I HAVE A SUZUKI GSF650 BANDIT K6 PROBLEM, I'VE REMOVED THE FUEL TANK , AND WHEN I RE- ASSEMBLE IT IT SEEMS I MISS PLACED THE UNDER TABK WIRES , AND THE BIKE IS NOT WORKING !


it just like you said...you'll have to take the tank, seat, and fairings back off and search everywhere for them..they'll be there, unless someone cut them off.....you might have to put in some extra time start at the rear and work forward..hope you find them.

Nov 16, 2009 | 2005 Suzuki GSF 650 N Bandit

2 Answers

Battery access


it should be located under the seat

Aug 05, 2009 | 2005 Suzuki GSF 650 N Bandit

3 Answers

Ive lost the manuel for my 2005 Suzuki GSF 650 Bandit k5. Is there somewhere i can download a free copy?


http://www.manualesdemecanica.com/en/service-manuals.html?func=fileinfo&id=603

"This manual contains an introductory description on the SUZUKI GSF650/S and procedures for its inspection/service and overhaul of its main components."

You need to register, but it's free. Don't know if they spam alot, but it might me a good idea to use some other e-mail account than your primary one.

Regards,
Chris

Jun 05, 2009 | 2005 Suzuki GSF 650 N Bandit

2 Answers

Lost manual what are the tyre pressures for suzuki bandit 650


According to my Haynes manual for 600 and 1200 Bandit fours the correct pressues are 33psi front and 36 psi rear

Sayin that it says the 1200 is 36psi front and rear and everyone kens it's 36 and 42

Apr 13, 2009 | 2005 Suzuki GSF 650 S Bandit

1 Answer

Tire pressure


For the 600 it's 33psi (2.25 Bar) for the front and 36 psi (2.50 Bar) for the rear

Nov 10, 2008 | 2005 Suzuki GSF 650 N Bandit

2 Answers

Raise the seat


First take off the seat, turn it upside down, unscrew the two screws and two bolts that hold the two parts of the seat together. Separate the pillion and rider seat (takes a bit of wiggling), now you can concentrate on the riders seat. undo the four screw that hold all the rubber gromets down (make a note of the direction they are facing), and unbolt the two small bolts on the front. The seat should now come apart, move the bracket at the back of the seat down a hole. Re-attach the two halfs of the seat at the front but this time one hole up. You should see a gap between the two halfs. Put the rubber gromets back on, this is where I went wrong the first time, TURN THE FRONT TWO 180 degrees and leave the back ones how they are. Screw everything back together and you have one raised seat my long legged friend.

Nov 10, 2008 | 1997 Suzuki GSF 250 Bandit

Not finding what you are looking for?
2005 Suzuki GSF 650 N Bandit Logo

Related Topics:

388 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4477 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...