Question about 1980 Suzuki GS 750 E

2 Answers

Cant tell what year

Ive got a GS750E. Heres the problem. I cant tell what year it is. The tag on the goose neck is pretty well worn off. This is what is stamped on the motor. GS750-81967. On the goose neck the numbers that are stamped on it is GS750E-33744. I got that its a GS750E. But from this info, Can anyone tell me what year it is? And one more thing. Can anyone point me in the right direction to find a compleat wiring digram and fluid capacity.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Only info i have on my engine is gs 750 74695 im told its1979 how can i be sure
it has kick start and points

Posted on Nov 11, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,336 Answers

The 10th digit in the VIN denotes what the year of the bike is. (as long as it is a 1981 to present) * Beginning in August 1964 - 1980 a system went into effect that included vehicle model and year within the production serial number. This system defined the first two digits to indicate the model, the third digit indicates the year, with the fourth through tenth digits now defining the actual serial number. If you call GDL Cycles they can help you. 1-888-707-2787 they also have a service manual available for the Suzuki GS750

Posted on Nov 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Motobecane handlebars need tightening


If they are tuning left and right the the center bolt on the top of the goose neck will do it. If they are loose at the goose neck and moving forward and backward then you need to tight the bolt underneath at the point the bars are in the neck. If you can't tighten it anymore you have two choices but you must first determine if it is the handle bars or the goose neck that is stripped. If it is the handle bars then replace them and if it is the goose neck replace that. The other think you can do is make a shim from a piece of metal and wrap it around the bar and tighten the goose neck on that again.

Aug 07, 2012 | Motobecane Jubilee Deluxe

2 Answers

IM TRYING TO LOCATE WHERE THE THERMOSTAT IS LOCATED ON THE 3.1 LIT. ENGINE


back of engine. Also, please see my tip at http://www.fixya.com/cars/r5929960-s_thermostat . These are generic instructions. If you get stuck or need specific instructions for your car, please get back to me with model, year and engine info.

jturcotte_38.gif

Nov 04, 2010 | 1995 Oldsmobile Cutlass Supreme

1 Answer

How to install a thermostat in a ford ranger 4.0L engine?


Its easy follow the top radiator hose back to the engjne to the goose neck the t.stat is under this part Drain some antifreeze from radiator you don;t have to drain itall out Remove clamp from hose to goose neck Remove bolts holding neck on you will lose a little antifreeze in the prosses Claen all old gasket meterial off bolth sides this is important it must be clean Remove old t.stat check the tempature stamped on t.stat replace with the same or similar temp you don;t change this to much Install new t.stat and gasket you can use a sealer it won;t hurt Install goose neck but don;t over tighten you can crack the neck 10 to 12 ft lbs is all you need BUT THE T.STAT IS NOT USELY NOT THE PROBLEM WITH COOLING SYSTEMS you can try back flushing the system and putting new antifreeze first this may solve your over heating problem

Oct 31, 2010 | Ford Ranger Cars & Trucks

1 Answer

Suzuki 250 Dirt Bike, electric start. serial number J428=104118....year of manufacture????


should be stamped on the frame or on a tag on the frame ... look around the frame neck.

May 15, 2010 | Suzuki Rg 250 Gamma Motorcycles

1 Answer

Seeking instructions on how to replace a goose neck on a 1997 toyota avalon


heard some weird descriptions on here from across the big pond ,but please tell me this one ,goose neck ??

Apr 05, 2010 | 1997 Toyota Avalon

1 Answer

Cant get the handlebars to stay in place


Usually on the bottom of the bolt going through the goose neck and into the fork tube, there is a nut with an angle on it. When you tighten the bolt it pulls the nut up with the angle on it locking it into place. Check to see if the lock nut is on the end of the bolt, or has fallen off in the goose neck.

Apr 04, 2010 | Huffy 12 in. Girls Disney Princess Single...

1 Answer

How do i change a thermostate in a ford fiesta & whr is it located h reg 1.4 petrol?????


follow the bottom radiator hose to the engine. the termostat will be under the goose neck the hose is atached to. remove the hose and the bolts on the goose neck. pull the goose neck off and the thermostat will pull right off. remember to replace the gasket with it

Jan 15, 2010 | 1989 Ford Festiva

1 Answer

How do you replace A thermostat on a chevy impala 95


follow the bottom of the radiator hose till it goes into the goose neck remove the hose and the goose neck the thermostat will be under the goose neck. make sure to replace the gasket with the thermostat

Jan 02, 2010 | 1996 Chevrolet Impala SS

1 Answer

I bought a yamaha 250 highflite , it looks like an enduro but cant tell ,has a yellow gas tank also front @ rear lite ,trying to find year and model type,cant find serial # also has highflite on the seat


The VIN should be in front of the gas tank, stamped into the neck of the frame where the steering connects to the frame. The dealer should be able to read the VIN code and tell you all the info on the bike. That location is an industry standard. If the VIN is not there then something might be fishy.

Please rate this answer. (four diamonds would be nice) Thanks!

Apr 05, 2009 | Yamaha XS 500 Motorcycles

Not finding what you are looking for?
1980 Suzuki GS 750 E Logo

413 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...