Question about 2007 Suzuki DR-Z 400 SM

1 Answer

Suzuki drz 400sm

Im looking into buying a 05 or 06 drz 400 sm i was wondering what power is produced as standered easly restriced to 33bhp? thanks and at 33bhp easy to wheelie ?

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 2,336 Answers

They should be around 33hp at the rear wheel. They should wheelie ok, though you will need to try a bit for decent ones.

Posted on Nov 10, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My odometer is stuck at 99,999.9 it wont flip over to 100,000 km....can it just be set back to zero? I have a 2008 suzuki drz 400

Hi, Maria for this situation I would call or visit my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
What are some good DRZ Speedometer Odometer Tachometers
How to fix Suzuki DRZ 400 Speedo when stuck in kmh
Suzuki DR Z400E 2000 Service Repair Manual
OEM parts for Suzuki
Suzuki DRZ400SM Owner Manual

Apr 17, 2017 | 2008 Suzuki DRZ400S

1 Answer

I put a fmf slip on, on my 06 Suzuki 125 drz-l and it is running a bit lean I was wondering what size I should go with on the jetting?

I take a small drill and go up to the nearest 0.1 say if you have jet with 104 bore, go to 1.1 drill, means 110 bore, next is 1.2 and so on,
When you find the right size, then buy a jet in that size.

Sep 11, 2014 | 2006 Suzuki DRZ 125

1 Answer

Runs good for a couple minutes after starting, then at idle a small miss begins to occur, it increases and it stalls. this sook was running perfectly at 55mph and it died, no fire,after a few minutes it...

Hi Olddog6, and the usual suspects are:
1. Spark plugs in bad condition or partially fouled.
2. Spark plug cables in bad condition and leaking.
3. Spark plug gap too close or too wide.
4. Faulty ignition coil, module, and or sensor.
5. Battery nearly discharged.
6. Damaged wire or loose/broken connections at battery terminals/cables, especially the "NEGATIVE" cable at both ends, ignition coil, or plug between ignition sensor and module.
7. Intake air leak.
8. Water, dirt, or rust in the fuel system, carburetor and/or filter.
9. Fuel tank vent system plugged or carburetor vent line closed off.
10. Carburetor controls misadjusted.
11. Damaged carburetor.
12. Loose, dirty, or corroded ignition module connector at crankcase.
13. Faulty MAP, CKP, and/or CMP sensors.
14. Incorrect valve timing.
15. Weak or broken valve springs.
16. Damaged intake or exhaust valve.
For more specific information about your issue, please visit the websites below or contact me at Good luck and have nice day.
2007 Suzuki Motorcycle Service Repair Workshop Manuals

Oct 10, 2011 | 2007 Suzuki DR-Z 400 SM

1 Answer

Fokr oil for a dzr 400sm 08 amont

G'Day ivan,

Fork oil capacity, per leg 182 mL (6.15 US oz) inner rod
350 mL (11.8 US oz) outer tube ------

regards robotek

Apr 08, 2010 | 2007 Suzuki DR-Z 400 SM

1 Answer

I have a 52 plate suzuki DRZ 400 SM and sometimes

Get yourself some " Contact cleaner" aerosol to clean the contacts in your ignition barrel. Access should be fairly easy if you remove the headlight and fairing.
Sounds like you have been in mud or dust, contamination has most likely got into the switch.
Check and clean the kill switch on the handlebars while you are at it.
Happy Trails!

Mar 30, 2010 | 2007 Suzuki DR-Z 400 SM

1 Answer

Changing the oil on a 2003 suzuki motorcycle

1700 ml oil used in this Bike.

For more information use the link:

Mar 15, 2009 | 2003 Suzuki DR-Z 400 E

1 Answer

My 07 DRZ 400SM backfires when I let off the throttle.

You have an air to fuel ratio screw on the carb that may help. Is the exhaust factory or after market? Google the service manual on it and find where you can adjust the fuel air ratio, not hard to do.

Jan 08, 2009 | 2007 Suzuki DR-Z 400 SM

1 Answer

Seat removal

Pull out the 2 rear seat bolts, lift the rear an inch or two and slide it rearward.

Nov 10, 2008 | 2006 Suzuki DR-Z 400 SM

1 Answer

Buying a bike

im 19 and the law in my country requires i cannot ride a bike of over 33bhp untill 21. does any body have any recommendations of bikes with or just below 33bhp. im aiming for 250cc ( i know there are some 400ccs with 33bhp) any suggestions greatly appreciated. thanks:)Honda VTR250,

Nov 10, 2008 | 2007 Highland Dirt-Track

Not finding what you are looking for?
2007 Suzuki DR-Z 400 SM Logo

Related Topics:

312 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts


Level 3 Expert

77186 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers


Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides