Question about 2001 Yamaha WR 426 F

2 Answers

HID kit I have a Yamaha Wr 426 dirt bike. I just bought a hid kit for motorcycles and I want to know how much power it takes for the initial ark on the bulb. Or how much power the bike will need to produce.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 88 Answers

Here is a link that explains it for you.

http://www.halcyon.net/lights/hid-faq.shtml

Posted on Jan 09, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,336 Answers

On cars it's quite a bit, up to 30 amps. BUT I don't know, when I was told this is that was for the CAR (both lamps) or if that was per light. It takes alot to fire them up, but once they are going they consume less than a regular incandescent bulb does. Sounds like you know this already though.

Posted on Nov 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to install HID to honda xrm 125


Did you buy a HID bulb or did you buy the kit with the ballast etc? Usually an HID lamp will come with a ballast and wiring loom which is per fitted with relays etc. you would normally plug this loom into the headlight socket of your bike's wiring and then tidy the ballast etc behind the fairing and replacing your bulb with the HID lamp. If you don't have the loom and ballast they're pretty easy to come by on the auction sites.

Jul 14, 2014 | GAS EC 125 Motorcycles

1 Answer

Howto rebuild a Yamaha 2001 WR 426 F


you will probably have to go factory, i know they are expensive but its always good to have one.

Jan 17, 2013 | 2001 Yamaha WR 426 F

1 Answer

Installing HID headlamp on cbz xtreme


Hi i have New CBZ Xtreme recently launched which has 12v/4Ah battery, i would like to install HID kit for my bike. I normally drive in night about 20-25 kms....is it good to go for hid kit for my bike with this type of battery and will it give good output?

Jul 30, 2012 | 2005 Bajaj CT 100

1 Answer

Can i buy this bike? How much is this bike cost if i purchase?


Hi,
I don't know where are you from, but here in Italy you can buy it
with 2000-3500 euros.
http://www.moto.it/moto-usate/yamaha/wr-426-f/index.html
http://www.moto.it/moto-usate/yamaha/wr-426-f/wr-426-f--2000-01/index.html?msg=2874104
Good luck,
Alex
PS-Please don't forget to vote me, thanks!

Nov 24, 2010 | 2001 Yamaha WR 426 F

1 Answer

I have two HID with Normal lights in it ..while in Low beam both the normal lights light up but when i turn on the HID after 5 mins the bike turns of indicating that there is low battery ... i took the...


common problem with hid's... is the installation your having a power drop... nowadays modern bikes are battery operated due to comp.box and dc cdi... if the system detects an amphere drop it will shut down... things you have to checks... battery terminal should be securely tight... check for loose ground lines, negative lines... hid should have its own harness usually comes up with the hid kit... hid positive and negative line should be connected directly to the battery. no alteration, or jumpers should be done... it adds resistance to the wire causing to power drop... secure the hid relay loose relay terminal will result to amphere shortage... MAKE SURE YOU CONNECT YOUR HID POSITIVE AND NEGATIVE LINE TO THE BATTERY TERMINAL... AND NO LINE SHARING... good day!

Nov 22, 2010 | 2008 Yamaha YZF-R15

1 Answer

Need help on the letter


WR stands for wide range if I remember in 1989 there was the YZ250 and the WR250 both two strokes.
The WR was the enduro model with a wide range gear box. low first gear and overdrive in top
The WR four strokes started around 1998, but Im not sure if the gearbox are much different to the YZF.
In australia there is a compliance plate on the headstem with model ID.

Jun 13, 2010 | 2001 Yamaha WR 426 F

1 Answer

Is tere a way i can tame the power of a wr 426...i only want the botom and mid range.the top end power scares me. thanks russ.


Maybe by adding a flywheel weight, but...this engine is made to run strong, either ease up with the right hand, or go for a smaller bore bike.

Nov 25, 2009 | 2001 Yamaha WR 426 F

1 Answer

How much to register 2001 yamaha wr 426?


What state are you in? I live in California and have two Yamaha 426 bikes. One is dirt only costs $60 to register Green sticker for two years and the other is street legal and it's registration fees are based on its value and renews every year

Oct 07, 2009 | 2001 Yamaha WR 426 F

3 Answers

Scooter HID headlamp leading to power loss


Cutting the wire will do. My Mio also have a HID any that's what we did (cutting one wire). But you can also try alternative like installing a fast charger. So you can charge up your battery fast as you use your HID.

No problems encountered with my HID using the cutting methode.

Sep 30, 2009 | 2006 Yamaha DT 125 RE

Not finding what you are looking for?
2001 Yamaha WR 426 F Logo

Related Topics:

270 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1128 Answers

D. E. Hev

Level 3 Expert

1059 Answers

mikeuk

Level 2 Expert

61 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...