Question about 2008 Yamaha Gladiator

2 Answers

Chain Advice

I ordered a DID galiditor gold chain from my dealer who tells me they are not available in all gold but are only available with gold outer links and black inner. I'm having my wheels powder coated same gold as on the engine and using a Stealth sprocket so an all gold chain would be nice. I know it's not a big issue but can anyone tell me if my dealer is correct?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 363 Answers

If you want to know more things about RSGold can go to this website www.rsgoldfast.com
Our service is the most professional and most secure and convenient

Posted on Nov 15, 2016

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,336 Answers

Not sure i know rk used to make a gold chain that was very good, stay away from ek

Posted on Nov 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How come driv chain comes off when you shalf gears Is transmissiom lose? Is bearings bad in shaft that chain goes around ? I need a diagram of transmission HELP!!!!


i would look for the chain is bad and or are bad spockets worn down chain jumps off when shifting replace these parts let me now and wheel go from there cost 50.00 to 100.00 if you can find parts go to dealer tell what you need andhe will tell you if they cane get it thats a lawn mower dealer

Sep 04, 2014 | Husqvarna WE261 960220007 26 190CC Weed...

1 Answer

How to replace a timing chain on a 2003 745li with a 4.4l engine


Why do you need to? Who told you it was bad? Just because you car won't start, doesn't mean it has anything to do with the BMW chain.The timing chains are double roller chains that are probably the last thing that would ever break no matter how many miles are on it (200, 300 or more thousand). They are also incredibly complex to change (BMWs have variable hydraulic timing) and require specialized tools not available except by special order. It requires a lengthy engine dissasembly. If you have changed timing belts and chains on other cars and feel you might as well try BMW, then my advice is to sell the car now, because it will never run again.

Aug 06, 2014 | 2003 BMW 745 Li

1 Answer

Loud knocking noise after water pump fitted Peugeot 207 SW


you are have what is known as a dry tappet. last for 5-10 min on startup. now you can leave it or you can change the oil and filter. when changing oil I mean you use oil treatment first to remove the old oil deposits. then change the oil. the only other way is expensive removing the cam's that involve taking of the timing chain and other parts to remove the dry tappet and clean out the vaine. but usaly a good oil change will fix this problem..

Feb 24, 2014 | Cars & Trucks

2 Answers

Need to order new 16" chain for my remington chain


Hi mariam608...
Go to HomeDepot and you can buy one off the shelf.
You can also order it online at:
http://www.amazon.com/Oregon-S56-Craftsman-Homelite-Remington/dp/B00004RA82
It will be made by Oregon...P/N S56 low profile...
It will fit your Remington Electric and other chainsaws.
Please take time to rate me

Sep 07, 2011 | Remington 16" Electric Chain Saw

2 Answers

This 2002 nissan 2400 pickup has had the timing chin replace by my mechanic. he swears up and down he did it correctly. After letting another mechanic so-call mechanic took the carburetor screws in and...


Hi, your diagram is below. Also threw in the timing marks. Not sure how hard it is to get the top cover off the timing chain as I have not worked on this engine. If you could get a peek at those timing marks you could verify valve timing. Let me know if you have more questions, and thanks for using FixYa.

jturcotte_806.gif

jturcotte_807.gif

Jan 11, 2011 | 1997 Nissan Pickup

2 Answers

I need to know the sincronization on a time chain for a nissan mazima 97, engine 3.0


The camshaft inner chains have gold links on them to line up with the mating marks on the camshaft inner sprockets.
The Main Drive Chain has two blue links that line up on the camshaft outer sprocket mating marks and a gold link that lines up with the mating mark on the crankshaft sprocket.

Jan 05, 2011 | 1997 Nissan Maxima

1 Answer

Tightening the chain


Fuel ratio is 40:1 using modern chain saw oil--not any petroleum base oil like boat motor oil. Be sure to premix fuel and oil in it's own container and to shake vigorously just before filling the saw each time. To remove the chain, loosen the chain adjustment screw several turns CCW, release the chain brake, and remove the side nuts that hold the rear chain cover. The cover will just pull off, then the bar can be pulled rearward somewhat and the chain worked off of the bar. Remove the bar by pulling it outward. Clean the entire area where the bar and chain fit to the engine, then clean the bar oil ports that run from the larger holes out to the chain groove on each side of the bar. Start the engine with bar/chain removed--oil should ooze out of the side port where the bar fits to. If ok, and the chain appears to be relatively unworn, refit everything in the reverse order of removal, making sure that the chain teeth cut toward you on the bottom run, and the chain adjustment tang drops into one of the large oil holes when replacing the cover. Tighten the mounting nuts only finger tight, and adjust the chain screw CW until the chain ceases to droop from the lower side of the bar, yet not so tight that it can't be turned by hand. Tighten the mounting nuts firmly and recheck the chain tension. If ok, and the engine runs well, start the machine and hold the bar tip near some cardboard while running at speed for several moments--it should throw off a thin line of oil onto the cardboard. Use common chain/bar oil available from home centers, hardware stores and saw dealers. Make sure the chain is properly file sharpened. Hope this helps!

Jun 05, 2010 | McCulloch 16 Inch Gas Chain Saw MCC1635AK

2 Answers

What type of oil does remington 3.5 electric saw use


Use regular chain/bar oil available from home centers, hardware stores, and saw dealers. Hope this helps!

May 30, 2010 | Remington 16" Electric Chain Saw

1 Answer

Chain for 24


Oregon Bar & Chain Selector
http://www.oregonchain.com/pro/lookups/selguide.aspx?BusId=OCS&SellReg=USA&LangId=ENG
Select "Husqvarna; 455; 24"; All; All; All" and make your choice. A couple of things to consider, it only returns 3/8 pitch chain, 0.325 is also available. I ordered a 24" bar for my 359, a Carlton that only takes 81 drive links (82 is normal). I saved $20 by ordering that bar, I just have to be careful when ordering chain. I prefer Stihl chain to Oregon. My Husky is maintained by Stihl mechanics and gets Stihl 2-cycle oil; please do not tell her, she may never run for me again. LOL

If you have more questions or need additional help please reply below and I will get back to you. Good Luck. HTH
Lou
Thank You for using FixYa.

Apr 24, 2010 | Husqvarna , No.455 Rancher, 20" Gas -...

2 Answers

Chain length


For a honda 1999-2000 CBR600

you will need a 108 chain link. This is the standard link considering your front teeth has 15 and rear has 45.

If you're not sure of the chain length, buy the 120 link 530 Heavy Duty chain. THe longer the better, you can always cut the chain (using a chain cutter and repair kit) if its excessive.



I recommend you buy the gold chain-type.

Mar 16, 2009 | 2005 Honda CBR 600 RR

Not finding what you are looking for?
2008 Yamaha Gladiator Logo

Related Topics:

150 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1128 Answers

D. E. Hev

Level 3 Expert

1132 Answers

puggy666

Level 1 Expert

47 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...