Question about 2001 Yamaha FZS 400 Fazer

1 Answer

Tranny swap from 1998 to 2001 possible?

Hello all! I'm new to the board and did a search but could not find the answer I needed so I decided to post a thread about it. I have a fzs 1000 with about 22k miles on it and is currently in the shop for shifting issues. I'm hoping they are going to tell me that it is something simple like my clutch needs to be adjusted or I just need a new clutch. Something in my years of riding tells me its something else. Here's the issue: When I'm in neutral and I shift down to first it doesn't want to go in. I have to rock it back and forth to get it to catch OR I can use the method of finding the sweet spot of where it will catch. Once in gear I can go through all my gears by using clutchless shifting. Down shifting is also not an issue. So I'll ASSUME that my gears are all fine. Its only when I'm in neutral is when it gives me an issue. So I narrowed it down to 3 things, my clutch (needs adjusting or needs to be replaced due to the fibers and whatnot) my dogs/tranny are bad or my shift fork. Anywho, if worst comes to worst and I have to replace my tranny, will a 2001 R1 tranny fit into my 1998 motor?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,336 Answers

Yes the later box will fit.put in the gear selector drum and forks as well. i have seen 98s with broken drums but the biggest problem with all of the 98-03 is the selector spring breaking.this can be fixed from under the cover on L/H side without a major strip down. fixed lots with broken springs .they only cost about 80 pense/$1 . hope this helps.

Posted on Nov 10, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a 98 ram with 318, body smashed. Will the motor transplant into a 2000 Dakota 4.9. Thank u


Greg, you may have to transfer everything from donor truck to make the swap work tranny , computers, wire harness, fuse/relay center etc. Check the attached links,forum for Dakota engine swaps,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
engine swap 4 7 to 5 2 or 5 9 Dodge Dakota Forum Custom Dakota Truck Forums

2000 dakota engine swap not sure which engine would be easier 4 7 or 5 2

http://www.dodgedakota.net/boards/v8/12324.html

318 Dodge dakota 0 60 v8 swap

Apr 13, 2016 | Cars & Trucks

1 Answer

What does it take to put 4.0 in jeep tj, take out 2.5


you will need all new harness and EFI,
move the engine with the FULL EFI system and it can work
the primary wiring will be worse pain, ASD and all that.
mech, (mounts, and tranny)

why not join a jeep forum a real one. and post to the swaps sections
or better , read there swaps sections first.
me, i sell it and get 4L. , save 100hr labor.
here is the parts cat
http://www.jeep4x4center.com/knowledge-base/index.htm?utm_source=cj#service

see it>, no look up the tranny part numbers, (a/t or m/t?)
or clutch or bell housings.. and mounts, they are all there.

google jeep forum engine swap

here ill do that for you......

https://www.google.com/webhp#q=jeep+forum+engine+swap

bingo?

Jan 27, 2014 | 1995 Jeep Wrangler

1 Answer

I Have A Neptune Washer Model FAV6800AWW Have error code of LR Lock rotor? what is bad? control board ot motor or both?


Motor for the most part is bullet proof has a 10 yr warranty

I would start with front panel removal and see if you can rotate the Clutch Pulley CW the Wash/agitate direction and CCW the Spin direction. Make sure nothing is seized.

It could be an issue with the Control Board or the Motor Controller. I have working spares for all and that makes troubleshooting easier.

If you decide to troubleshoot further and try a Control Board swap (in the console) or a Motor Controller swap I would buy parts from a supplier that will allow you to return the part for refund with no questions asked.
Google this ""Neptune TL Washer FAV6800AWW"" a forum where I help owners of the FAV6800A and FAV9800A machines.


This is a sticky on a DIY forum at the 5th post down you can link to the FAV6800A/FAV9800A Service Manual. You can post in that forum in the Maytag washer forum for additional help. You will find a link to parts supplier.
I link you to a post on this forum where I was working with an owner who was troubleshooting issues and started throwing a LR error code. He ended up replacing both the Motor Control Board, my 1st suggestion and that did not resolve the issue. A Control Board swap in the Console resolved the issue. Maytag Neptune Top Load FAV6800AWW -- tub/motor will not spin ... I won't troubleshoot any further on this forum it's just difficult for me. Can't edit, search post and sometimes pics don't attach. There are better DIY forums out there for working on the FAV6800A/FAV9800A......just mu opinion.

Your machine more than likely is ready for an Tub Seal replacement.....Google this FAV6800A/FAV9800A Outer Tub bearing replacement Another forum I help owners with FAV6800A/FAV9800A machine issues........good luck.

Sep 06, 2011 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

I have a 89 toyota extra cab pickup with v6. it needs tranny. what years will interchange? going to swap for working tranny from private owner. where to start.


i thinks it will swap with a 89 to 95, possible a 96 will work. the identification label on the inside of the door will have your tranny listed. g58, w56, w59 and r150f. something like that, find another like it and your good to go.

Sep 08, 2010 | 1989 Toyota Pickup SR5

1 Answer

93 chevy 4x4 with a 4l60e tranny. will a 98 tranny swap?


Nothing after 1995, because from 1996 on the transmissions are for OBD II. Your truck has OBD I.

May 05, 2010 | Chevrolet Silverado 1500 Cars & Trucks

2 Answers

CPU Problems


What can also give the same symptoms as a doa cpu is bad ram. About the only difference is that you usually get a post code with a cpu problem and absolutley nothing with ram.

About the only way to check a cpu is to swap it out. They are not that expensive compared to a new pc unless you want an excuse to upgrade ;-]

Ram is checked by swapping it out or just removing and checking one stick at a time. Sometimes they just need to be reseated and away it goes.

Also check the power supply. If it has overheated or dired etc nothing will work.

Once you have checked out those three you will know if it is worth fixing or junking.

Sep 11, 2009 | E-Machines eMachines Desktop PC

1 Answer

1984 F150 Transmission Issue


If it's carbureted, there is adjustment at both places, carb & tranny that can be done, and it's a good possibility you bent or banged one of the linkages while doing your exhaust.

May 19, 2009 | 1984 Ford F 150

1 Answer

Transmission


best to buy a factory remanufactured trans, do an internet search for your best price.

Apr 09, 2009 | 1987 Chevrolet Blazer

2 Answers

Changing a P3 motherboard for a P4 motherboard


P-4 boards want at least a 300w power supply, P3 were not so picky. Next, swapping boards is easy but remember to stay in the same form factor, (the relative size length and width) a server board won't fit in a micro case.

The location of the stand offs (where the screw holes are) may have to be changed. P4 boards have 20 pin or 24 pin power connectors so the appropriate power supply will need to be ordered. If you are running a lot of peripherals a 450w ps at least.

Now you decide if you want a board with on board, video,nic,sound,etc.

then you have to order the supported processor/heatsink and fan/thermal grease/supported Ram etc.

I've been doing this for years so i probably left out a lot.

Lately because of costs I've resorted to backward building.
I decided since DDR2 is cheap, find a board that supports that ram in a processor socket I want to use (socket 478-775) etc.

Mar 21, 2008 | Intel Motherboard

Not finding what you are looking for?
2001 Yamaha FZS 400 Fazer Logo

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1147 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...