Question about 2008 Victory Kingpin

1 Answer

Oil change How do I change oil in a 2005 Victory Kingpin?

Posted by on

  • Anonymous Mar 30, 2014

    Remove battery cover

  • Anonymous Mar 31, 2014

    Just bought 2005 kingpin the front cylinder is not firing have changed the plugs and wires. Not sure what to try next.



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 2,336 Answers

Check your owners manual for the location of the sump screw. If you don't have a center stand, or someone to help by holding the bike so it's straight up, you can put some wood under the kickstand later. It's best to do this with the engine slightly warm, so run it for a minute or so. Then loosen the oil filter and then open the sump screw, making sure you have a basin underneath to catch the oil. Take out and clean the sump screw and remove the old oil filter. Open the place to fill the oil too. When all the oil is drained, put a thin film of oil around the gasket on the new filter and screw it on following the instructions that come with the filter. Then replace and tighten the sump screw. Carefully fill the machine, being sure to not overfill. This is when you need the machine to be upright so you can check either the dipstick or sight glass. When you've filled to the correct level start the bike and make sure there are no leaks. Then check your level again. You should be good to go.

Posted on Nov 10, 2008


2 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 149 Answers

SOURCE: rear brake light wiring diagram for 2005 victory kingpin

Posted on Aug 31, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What is the fuel pressure specs. for a 2005 victory motorcycle ness kingpin.

Good afternoon. Since all Victory engines were the same in 2003-5, the 2004 Vegas/Kingpin manual I have specifies a pressure of 3.37 BAR (338 kPA) or 49 psi.

Jul 18, 2014 | Victory V 92 C Deluxe Motorcycles

1 Answer

Drive belt diagram

Go to a dealer & buy a service manual

Aug 25, 2013 | Victory Motorcycles

1 Answer

My kingpin stars but will not start

Hi Suar677, for more information about your question please visit the website below. Good luck and have a nice day.

Feb 28, 2013 | 2005 Victory Kingpin

1 Answer

2006 Victory Vegas Jackpot fork oil change

Hi, Jcmarchildon for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Victory, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Fork oil change
Victory fork oil change
03 06 Kingpin Vegas 8 Ball Ness Vegas Ness Kingpin Service Manual pdf
Motorcycle Service Parts Part Finder Victory Motorcycles Store
Victory Motorcycles 2005 Vegas Owner Manual

Aug 10, 2017 | 2006 Victory Vegas Jackpot

1 Answer

How do I remove my victory kingpin 2005 ness factory seat

For the front seat normally you removed the side covers then look for two screws, one in each side of the bike under the seat about half way from the front of the seat. that if you have two pcs,seats, for the pass. seat is another procedure.

Dec 28, 2009 | 2005 Victory Kingpin

1 Answer

What is the required service on an "06 Victory Kingpin @30,000 miles?

Owners manual has this. Every 15 K is the fork oil and I had my service center do a once over and of course oil change.

Jun 25, 2009 | 2006 Victory Kingpin

2 Answers

Rear brake light wiring diagram for 2005 victory kingpin

Jun 24, 2009 | 2005 Victory Kingpin

1 Answer

Genral oil change steps

1.Get your supplies ready, and expose your engine 2.Unscrew the Oil Filler Cap 3.Remove the Oil Drain Plug 4.Remove and Replace the Crush Washer 5.Clean the Oil Drain Plug 6.Remove the Oil Filter 7.Remove and Clean Plastic Mesh Filter 8.Lubricate the O-ring of the New Filter and Attach it to the Engine 9.Motorcycle Oil Change - Replace Oil Drain Plug & Plastic Mesh Filter, Pour Oil 10.Check the Oil Level

Nov 10, 2008 | 2007 Victory Kingpin Touring

Not finding what you are looking for?
2008 Victory Kingpin Logo

1,353 people viewed this question

Ask a Question

Usually answered in minutes!

Top Victory Experts


Level 3 Expert

79865 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4912 Answers

Joseph Hoffmann

Level 3 Expert

1746 Answers

Are you a Victory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides