Question about 2002 Triumph TT 600

1 Answer

Does changing the fuel map smooth the power delivery

Does anyone know whether downloading a later fuel map smooths out the power delivery and get's rid of the flat spot below 4000rpm? Just bought a tt600 second hand, ace bike, but trying to make it better... Perhaps fitting a power commander would help?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,336 Answers

A power commander won't help as I believe it is an issue with timing and not fuel delivery. I bought my 2000 and it came with a Power Commander. I tried messing with the fuel with little change in the results. I recently bought a 2002 ecu on ebay and swapped it in. It runs a lot smoother down low although the 5k-6k area feels a little flat so maybe I'll increase fuel there. I really should get it dynotuned at some point. If you're willing to swing the money, buy a Tuneboy instead of a power commander.

Posted on Nov 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is throttle response jerky?


Plastic explosives!!!!!!!!!! Seriously, have you checked out all of the linkages to make sure that there is no sticking during any part of its movement.

How about the fuel delivery system? Constant fuel pressure at injectors? Fuel injectors?

Dec 03, 2015 | Nissan Cars & Trucks

1 Answer

Why does my truck stall when I plug in the map sensor?


If that's all you have to offer then I would say your map sensor is bad...

May 09, 2014 | 1991 GMC Sierra

1 Answer

My 94 nissan sentra doesn't run smooth over 3000 rpm or if you mash the gas pedal


I have a 2000 Chevy Tahoe that did the same thing. I changed the oil pump, new oil, and head gasket. It now has power and doesn't fall on its face when I step into the throttle hard. Hope this helps.

Apr 21, 2014 | 1994 Nissan Sentra 4-Door

1 Answer

Opel corsa problems


now! no doubt you fuel up at Tesco's, whether your car is petrol or diesel your injectors will be clogging, get some injector cleaner, put that in your tank run your car for a good few miles, I mean a lot, I had same problem in my Jaguar just recently, a couple of bottles of jet cleaner in with fuel when I went to fuel up, 1 week later smooth as a baby's.

I hope this solves your problem, it the cheapest way to start diagnosing.

Mar 30, 2014 | 2001 Opel Corsa 1.0

1 Answer

Random missfire barely runs


could be lots of things realy?
but id check each cylinder with a compression guage as this will give a good indication on condition & possable head gasket leak or valve trouble
Also check the fuel delivery systems
good luck
Cheers rob

Aug 15, 2009 | 1996 Dodge Caravan

1 Answer

Tramission confort and power switch What is this switch for? It is located on the consoule of my used new to me and I do not know what to do with this nor what it is used for. Any info on this would be...


The function of that switch is to change the gear ratio. If you keep it on COMFORT then the car will run smooth actually this smootheness is cuz the gear changes rapidly & results in smooth engine sound & also economical in fuel & while the other hand the POWER switch will change the gear at high RPMs & therefore more engine noise & more fuel consumption.

Aug 10, 2009 | 1990 Nissan Maxima

1 Answer

Losing power when I accelorate.


Fuel filter is the main culprit when you lose power going uphill. Going level or downhill means that the engine doesn't have to work all that hard and doesn't demand much fuel, so a partially clogged filter can usually flow enough to allow the car to run smoothly. Going uphill requires signficantly more fuel, and if the filter is clogged up, it won't be able to flow enough fuel. This will bog the car down and cause you to lose speed. Change your fuel filter.

May 05, 2009 | 1988 Jeep Cherokee

Not finding what you are looking for?
2002 Triumph TT 600 Logo

Related Topics:

397 people viewed this question

Ask a Question

Usually answered in minutes!

Top Triumph Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

70347 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Are you a Triumph Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...