Question about 2007 Triumph Bonneville T100

1 Answer

Signalminder Problem Hi Guys, I just installed a Signaminder SM-1 on my 2003 Bonneville yesterday afternoon. Just the plug and play, no options wired up. Went for a ride this morning and everything was fine and dandy. Half way through the ride the signals packed up. Got home put the original signal relay back and now the signals are working OK. Anybody had similar problem with the Signalminder? Cheers

Posted by on

  • harvard217 Feb 17, 2009

    I'm installing the Signalminder SM-1, where did you wire in the three wires from the signalminder itself, and could somebody help me with the color codes, The instructions are something out of IKEA. I just want to know, I have everything else done, but I don't think wires I've hooked up to are right and before I go any further I want to know where other people have tied in.



    Thanks

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,336 Answers

Do you have the jumper switches set correctly? I can't think of anything else, unless you got a defective one. There's nothing to do but set the jumpers and plug it in.

Posted on Nov 10, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My starter went bad mower ran fine before starter went i installed new starter now it wont start it turns over and getting gas but wont fire.


Remove plug wire, hold close to plug, but not on it crank it over if spark is there plug may be fouled. remove, clean re-gap and install. If no spark check for loose broken wire from switch etc.

Aug 08, 2014 | Garden

1 Answer

Pick up coil


That is a carburetor issue, possibly TPS, or lean midrange condition.

Mar 19, 2014 | 2003 KTM 640 LC4 SM

1 Answer

Hi guys i have a craftsman ride on lawn mower and i changed new coil and new plug but is still not getting spark any ideas wud be great


sounds like you have a short on your ground wire...if you disconnect the black lead off your coil and then check for spark you may find you have one now. if so trace that black wire back looking for a bare spot where its rubbing metal. or it could be a safety switch gone bad. but pull wire to see if spark returns.

Oct 16, 2013 | Craftsman Garden

1 Answer

I have power at the fuse for the cigarette but nothing at the plug end


hi moe1969, i recently went through the same problem on a similar car which turned out to be a broken wire.

if you have a multimeter, disconnect the battery, and do an ohm test from the fuse socket to the plug end. hope this helps.

Apr 01, 2011 | 2005 Pontiac Bonneville

1 Answer

1994 Lexus will not start


i'd change the filter which is under the car on the drivers side just trace the fuel lines from the rear of the car toward the front its a large cylinder 9if that don't work then shoot it)

Apr 11, 2009 | 1995 Lexus ES 300

1 Answer

ATK 700 Intimidator


I've seen both the 620 and the 700. My son-in-law had a chance to ride the 620 2 years ago at Jawbone. He rides a CR500 and was VERY impressed with the 620. I went on an ATK ride a year ago and Frank brought a 700 along. A couple guys rode it on the beach before I got there but no one rode it after we got into riding. It looks very nice. Frank White says the 500 is the play bike the 620 is the race bike and the 700 is for fat guys to climb hills with!,,

Nov 10, 2008 | 2004 ATK 700 Intimidator

1 Answer

Power is on but no picture!


Hi...there,
It's seems you guys had a bad lucks! Your backlight inverter are busted. Need to replaced a new inverter...Guys! Have a nice day!

Sep 27, 2008 | Mag Innovision 19" LCD Flat-Panel Monitor...

1 Answer

Laptop wont run on battery!


ok it looks like your battery has run out of power thats why it would not run when ac is off.If it so happens that the laptop runs when battery is connected to ac then battery seems fine by me just flat. Conenect them to ac and run your pc,go to your control panell and power saving options and set to mimimum usage/power saving mode in this way you charge your battery.Remember bright screen consumes more power

Apr 24, 2007 | Acer Aspire 5670 Notebook

Not finding what you are looking for?
2007 Triumph Bonneville T100 Logo

Related Topics:

235 people viewed this question

Ask a Question

Usually answered in minutes!

Top Triumph Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

yadayada
yadayada

Level 3 Expert

77186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Are you a Triumph Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...