all the other gears are working fine but it just wont engage in top. Tried it at all different revs but nothing it just will not go in. What should i do?sounds like a possible selecter at fault.,,
Hi, I have a 1982 honda 200e 3 wheeler. I was wondering how to set the time? I believe its not timed...
(More)
Hi, I have a 1982 honda 200e 3 wheeler. I was wondering how to set the time? I believe its not timed right. I have gas and a spark but no go. I dont have the head light set up so is thats what wrong? Because I saw that the ground goes to the head light. All I can get the atc to do is backfire every once in a while. Doesnt run just a really load gun shot like noise and then white smoke comes out the exaust. The first time it did that there was alot of smoke but now I cant really even tell if there is. My dad wants to know how to set the time so we can check the valves and see if there ok. I bought it recently an I have never heard it run. And when I opened the cdi box there was a bunch of "red dust". DO you know what that was? And there is a screw or two missing from the carburetor. The idle screw on the outside ( i dont know to much about 4 stroke carburetors) and I think a screw above the choke switch. When I tip the carb over gas comes out of that hole so I dont know what it does. I cleaned the spark plug and the cdi box. I still get a spark but I thought it might help. How much volts or watts or oems is supposed to come from the cdi box? and how much is the spark plug supposed to give?
who would you recommend to service a custom bike in Yuma that has been sitting for 2 years .. with...
(More)
who would you recommend to service a custom bike in Yuma that has been sitting for 2 years .. with gas in it
keeps stopping after few miles brake and hornlight not working think both of these electrical.i can...
(More)
keeps stopping after few miles brake and hornlight not working think both of these electrical.i can travel ok few miles then it just cuts out.done all my usual checks etc.