Question about 2001 Laverda 750 SS

1 Answer

Help with Early 750S (1969)

.I have a 1969 American Eagle 750ss that lost it's original tank and seat sometime long ago and now wears a 750s tank which is great with me because I think it looks like a Laverda should. However

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,336 Answers

It had an incorrect seat on it and I would like to fit a bumstop style seat to the bike. It is different (slightly wider) than the later bikes. If anyody could help (even a loaner pan I could make a copy of)it would be appreciated. By the way I have some stuff from a crashed early 750GT that I have no use for and is available for trade or cheap. I don't have any bodyworkmainly forks. rear wheel airbox, that type stuff.,My memory of the 69 American Eagle is that it should have a locally made fibreglass tank, as that model was only a dressup bike done by Mr Mcormick of Continental Motorcycles. (he also badged up a British made moto crosser as an American Eagle, was it a Sprite or maybe and AJS Stormer) should be a slabby thing not unlike a cofin shape. Lance Weil of Ricky Racer had a couple a few years back and he is very near to you phone 1-800 Laverda, try him you never know.The seat should be the same width as the proper Laverda's (I think) It was only the 650 (42 in number) and the first 750 (the remaining batch up to 100) so another 58 that had the very first type chassis,quite a bit different in the way the tubes drop down to the swingarm pivot, or am I getting too much fuzz into the old grey matter, I could be wrong.,,,

Posted on Nov 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Garmin 750s problems


It sounds like the transducer moved, was damaged, is dirty or broken.

Jan 20, 2014 | Boating

1 Answer

Power 750s power light is red, and there is no out put to the sub


try putting RCA cables into a different output on back of radio if you have another set. also, check radio settings to see if subwoofer out has an on/off feature. make sure it is turned on.

Jul 24, 2011 | Rockford Fosgate Power 750S Car Audio...

1 Answer

My samsung 750s monitor has a message saying sync. out of range


When you turn off the pc the monitor loses the sync signal and should go into a suspend mode where the screen is blanked. The power management settings should be checked. In display properties check that the monitor is installed correctly.

Jun 06, 2010 | Samsung SyncMaster 750S Monitor

1 Answer

MV Agusta F4 750S (2000 model) stripdown


Can anyone advise where I can obtain a download or purchase a CD for F4 750S (2000 model) stripdown re-assembly and maintenance? The previous owner gave me a CD which contains:- 1. Owners manual. 2. Engine only stripdown and re-build (complete with poor photographs!) 3. Spare parts diagrams and part numbers. The above certainly seems to be taken from official MV sources and appears not to be a scanned in copy of MV documentation i.e. it seems to have been produced as a .pdf for printing off. I am really looking for detail like complete bike stripdown and re-assembly as well as basic maintenance such as chain tensioning brake pad and coolant replacement etc.do a search on the site for MV Agusta F4 750S Manual,,,

Nov 10, 2008 | 2005 MV Agusta F4 S 750

1 Answer

Valve guide seals for early 750 twins


If you have guides allowing to fit them there should be no problem. There is only one type of 8mm guide seals for the whole 750s range. I think the original guides of early models didn’t have the possibility to fit them as they didn’t have a smaller diameter in that area. At those times many motocycles didn’t have them at all and it worked quite well I personally wouldn’t change the guides just for that. Aftermarket guides are only of the type that allows to fit the seals. ,,,

Nov 10, 2008 | 2002 Laverda Formula 750

1 Answer

Laverda frame numbers


According to the repair guide the year 69 had frame numbers from 1650 to 2800 but this includes GT. The frame is different from SF frames,

Nov 10, 2008 | 2003 Laverda 750 S

1 Answer

Samsung SyncMaster 750S


1. check tha VGA cable is properly connected into the computer
2. possibly CRT board dry solder. you can touch up the solder joint

Apr 17, 2008 | Samsung SyncMaster 750S Monitor

Not finding what you are looking for?
2001 Laverda 750 SS Logo

235 people viewed this question

Ask a Question

Usually answered in minutes!

Top Laverda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Rigger

Level 3 Expert

898 Answers

Andrew Smart
Andrew Smart

Level 2 Expert

230 Answers

Are you a Laverda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...