Question about 2003 KTM SX 125

1 Answer

Gear stuck hey guys my friend just had his cases split in his because he put his air filter in wrong and his bike sucked up dirt so they had a professional do it so they got the bike back and he pop started the bike because the sparkplug was fouled and it ran great but it is stuck in second gear. Any ideas? sry for the long post

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,336 Answers

If a reputable shop did the work and they put something together wrong they will be happy to fix the problem free of charge. If a disreputable shop did the work they'll say, How do we know it wasn't like that when you brought it in? Either way, it's got to be opened up again,,,

Posted on Nov 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Vacuum brushes are turning but not picking up dirt and is blowing a lot of air out of the top air filter thing


Did you check carefully for splits? After sucking something up that big, you may have split something, like in a fold of the hose. When it is in a position where the split is somewhat sealed, it works. Move it just a bit and the split separates and it won't work.

Mar 29, 2014 | Vacuums

2 Answers

Bike quits when put into gear. Has been sitting for a few months. Checked oil.


What make bike???? there is an automatic shutoff switch on kickstand on Honda Bikes when put kickstand down automatically shut engine off If bike sitting in damp envirmoment over winter may cause it to shoot off soon as you put it in gear SO CHECK KICKSTAND SWITCH...HOPE HELPS

Jun 19, 2009 | 2004 Yamaha V Star Custom

2 Answers

Gear/clutch problem


does not seem like the waterpump. is the clutch set too loose?
usually in wire based clutches, if the clutch cable is set to be too loose, or if it is frayed, and needs replacement, the bike will jump and stall.
check that.

Dec 10, 2008 | 2003 Suzuki RM 250

1 Answer

Gear stuck


If a reputable shop did the work and they put something together wrong they will be happy to fix the problem free of charge. If a disreputable shop did the work they'll say, How do we know it wasn't like that when you brought it in? Either way, it's got to be opened up again,,,

Nov 10, 2008 | 2002 Husaberg FE 650s Dirt Tracker Chrome...

1 Answer

Gear stuck


If a reputable shop did the work and they put something together wrong they will be happy to fix the problem free of charge. If a disreputable shop did the work they'll say, How do we know it wasn't like that when you brought it in? Either way, it's got to be opened up again,,,

Nov 10, 2008 | 2004 Husaberg FE 550 e

1 Answer

Gear stuck


If a reputable shop did the work and they put something together wrong they will be happy to fix the problem free of charge. If a disreputable shop did the work they'll say, How do we know it wasn't like that when you brought it in? Either way, it's got to be opened up again,,,

Nov 10, 2008 | 2008 Husaberg FE 450 e

1 Answer

Gear stuck


If a reputable shop did the work and they put something together wrong they will be happy to fix the problem free of charge. If a disreputable shop did the work they'll say, How do we know it wasn't like that when you brought it in? Either way, it's got to be opened up again,,,

Nov 10, 2008 | 2003 HM Motard 125

2 Answers

Having motorbike trouble


have a VR 2000 Supermot and when I bought it the guy had taken off the air filter and box and put a racing exhaust on it. I dont know what other modifications he could have done. Anyway we put the original exhaust back on and just fitted an airbox with K&N air filter and it starts and ticks over fine and runs fine up to about 3 thousand revs and then it kangaroos (stop and start) and it stalled at one point. I checked and there is fuel in the tank. The fuel feed must be ok coz it ticks over and revs fine when stationary. I have a theory that the guy who modified it has put big jets on the carbs to give better air/fuel mixture. Would this explain whats happening? How can I fix it? Thanks for your time. i've been repairing dirtbikes and fourhwheelers since i was 12 with my dad, it sounds like a problem with the jets in the carburetor possibly one clogged with even the smallest piece of dirt will cause this, also how old is the bike, this sounds alot like a problem i had with an old dirtbike, sitting stationary the bike would run like new, yet get on it and put the engine under a load it would start sputterin and runnin like complete garbage, the bike was an 87 bw200 and after messin with the carb i ended up buyin a new one cause it was internally clogged but if its a newer bike i'd definently check the jets, and if you cant figure it out, then a local bike shop could probably diagnose the problem, if you have friends with bikes get suggestions from them on a good local place,,,

Nov 10, 2008 | 2000 Alfer VR 2000 Supermoto

1 Answer

My sons Dr250 Suzuki's gear leaver shaft has slipped into the motor and has no gears, I can pull it back out to its original position to select gears, the question is what is supposed to stop the shaft...


I believe that on these models the retaining clip is internal,and the shaft seats into a bearing at the other end. If the bearing has come apart it will allow the shaft to slide in and out also. Drain and check the fluid for metal or excessive shavings. If it were external, you should be able to see the groove for the clip with the shaft pulled out. Most likely, you're going to have to pull the engine, and split the cases to get to the tranny in order to fix the problem. Pain in the arse, I know, I've done it a few times on my dirt bikes. Assuming this is the DR250 enduro style dirt bike I'm thinking it is. If I'm wrong on the bike type let me know, and I'll see if I can get more info, cause I believe Suzuki also made a DR 250 S in the late 80's or early 90's, which was a sport bike.

Aug 24, 2008 | Harley Davidson Harley-Davidson Motorcycle...

4 Answers

Dirt devil mvp not sucking


Could be bad filters, is there suction at the end of the hose. That will tell you which direction to start looking. If no suction at hose end, then filters could be the problem. If you have suction, then the problem is down lower, dirt inlet is clogged, if belt has never been changed, then I am sure it has stretch to the point that under load it doesn't turn like it should. Could even be that although the motor is running, it may be running at a slower speed, in which case it would have to be replaced.

Oct 14, 2007 | Dirt Devil 12 Amp HEPA Filter Vacuum...

Not finding what you are looking for?
2003 KTM SX 125 Logo

Related Topics:

268 people viewed this question

Ask a Question

Usually answered in minutes!

Top KTM Experts

kevmx2003

Level 2 Expert

86 Answers

yadayada
yadayada

Level 3 Expert

74192 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a KTM Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...